delay

This register is used to introduce relative delays into the generation of the master output signals. All timings are defined in cycles of the qspi_clk.
Module Instance Base Address Register Address
qspiregs 0xFF705000 0xFF70500C

Offset: 0xC

Access: RW

Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

nss

RW 0x0

btwn

RW 0x0

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

after

RW 0x0

init

RW 0x0

delay Fields

Bit Name Description Access Reset
31:24 nss

Delay in master reference clocks for the length that the master mode chip select outputs are de-asserted between transactions. The minimum delay is always qspi_sck_out period to ensure the chip select is never re-asserted within an qspi_sck_out period.

RW 0x0
23:16 btwn

Delay in master reference clocks between one chip select being de-activated and the activation of another. This is used to ensure a quiet period between the selection of two different slaves and requires the transmit FIFO to be empty.

RW 0x0
15:8 after

Delay in master reference clocks between last bit of current transaction and deasserting the device chip select (qspi_n_ss_out). By default, the chip select will be deasserted on the cycle following the completion of the current transaction.

RW 0x0
7:0 init

Delay in master reference clocks between setting qspi_n_ss_out low and first bit transfer.

RW 0x0