transfer_spare_reg

Default data transfer mode. (Ignored during Spare only mode)
Module Instance Base Address Register Address
nandregs 0xFFB80000 0xFFB80010

Offset: 0x10

Access: RW

Important: To prevent indeterminate system behavior, reserved areas of memory must not be accessed by software or hardware. Any area of the memory map that is not explicitly defined as a register space or accessible memory is considered reserved.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved

flag

RW 0x0

transfer_spare_reg Fields

Bit Name Description Access Reset
0 flag

On all read or write commands through Map 01, if this bit is set, data in spare area of memory will be transfered to host along with main area of data. The main area will be transfered followed by spare area.[list][*]1 - MAIN+SPARE [*]0 - MAIN[/list]

RW 0x0