Probe_SoC2FPGA_main_Probe_TraceAlarmStatus

Module Instance	Base Address	Register Address
`i_noc_mpu_m0_Probe_SoC2FPGA_main_Probe`	`0xFFD14000`	`0xFFD1401C`

Offset: 0x1C

Access: RO

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`													`TRACEALARMSTATUS` `RO 0x0`

Probe_SoC2FPGA_main_Probe_TraceAlarmStatus Fields

Bit	Name	Description	Access	Reset
2:0	`TRACEALARMSTATUS`	Register TraceAlarmStatus is a read-only register that indicates which lookup table or filter has been matched by a packet, independently of register TraceAlarmEn bit configuration. The number of bits in TraceAlarmStatus is determined by the value set for parameter nFilter + 1.When nFilter is set to None, TraceAlarmStatus is reserved.	`RO`	`0x0`

Bit

Name

Description

Access

Reset

2:0

TRACEALARMSTATUS

Register TraceAlarmStatus is a read-only register that indicates which lookup table or filter has been matched by a packet, independently of register TraceAlarmEn bit configuration. The number of bits in TraceAlarmStatus is determined by the value set for parameter nFilter + 1.When nFilter is set to None, TraceAlarmStatus is reserved.

RO

0x0