pinmux_dedicated_io_10
This register is used to control the peripherals connected to dedicated IO pin 10
Only reset by a cold reset (ignores warm reset).
NOTE: These registers should not be modified after IO configuration.There is no support for dynamically changing the Pin Mux selections.
| Module Instance | Base Address | Register Address |
|---|---|---|
| i_io48_pin_mux_dedicated_io_grp | 0xFFD07200 | 0xFFD07224 |
Offset: 0x24
Access: RW
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
Reserved |
|||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
Reserved |
sel RW 0xF |
||||||||||||||
pinmux_dedicated_io_10 Fields
| Bit | Name | Description | Access | Reset |
|---|---|---|---|---|
| 31:4 | Reserved | Reserved |
RO | 0x0 |
| 3:0 | sel | Select peripheral signals connected Dedicated IO 10 0000 (0) Pin is connected to Peripheral signal not applicable 0001 (1) Pin is connected to Peripheral signal not applicable 0010 (2) Pin is connected to Peripheral signal spis0.miso 0011 (3) Pin is connected to Peripheral signal spim0.ss1_n 0100 (4) Pin is connected to Peripheral signal not applicable 0101 (5) Pin is connected to Peripheral signal not applicable 0110 (6) Pin is connected to Peripheral signal not applicable 0111 (7) Pin is connected to Peripheral signal not applicable 1000 (8) Pin is connected to Peripheral signal sdmmc.pwr_ena 1001 (9) Pin is connected to Peripheral signal not applicable 1010 (10) Pin is connected to Peripheral signal not applicable 1011 (11) Pin is connected to Peripheral signal not applicable 1100 (12) Pin is connected to Peripheral signal not applicable 1101 (13) Pin is connected to Peripheral signal not applicable 1110 (14) Pin is connected to Peripheral signal nand.cle 1111 (15) Pin is connected to Peripheral signal gpio2.io6 |
RW | 0xF |