timer1controlreg

         Name: Timer1 Control Register
  Size: 3 bits
  Address Offset: 8
  Read/Write Access: Read/Write
  This register controls enabling, operating mode (free-running or defined-count), and interrupt mask of
  Timer1. You can program each Timer1ControlReg to enable or disable a specific timer and to control
  its mode of operation.
Module Instance Base Address Register Address
i_timer_sys_0_timer 0xFFD00000 0xFFD00008
i_timer_sys_1_timer 0xFFD00100 0xFFD00108

Offset: 0x8

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved

timer1_interrupt_mask

RW 0x0

timer1_mode

RW 0x0

timer1_enable

RW 0x0

timer1controlreg Fields

Bit Name Description Access Reset
2 timer1_interrupt_mask 
Timer interrupt mask for Timer1.
  0: not masked
  1: masked
Value Description
0x0 NOTMASKED
0x1 MASKED
RW 0x0
1 timer1_mode 
Timer mode for Timer1.
  0: free-running mode
  1: user-defined count mode
  NOTE: You must set the Timer1LoadCount register to all 1s before
  enabling the timer in free-running mode.
Value Description
0x0 FREERUN
0x1 USEDEF
RW 0x0
0 timer1_enable 
Timer enable bit for Timer1.
  0: disable
  1: enable
Value Description
0x0 DISABLED
0x1 ENABLED
RW 0x0