ERRINTENS

         Error Interrupt set
Module Instance Base Address Register Address
ecc_hmc_ocp_slv_block 0xFFCFB000 0xFFCFB114

Offset: 0x114

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved

HMI_INTRS

0x0

DERRINTS

0x0

SERRINTS

0x0

ERRINTENS Fields

Bit Name Description Access Reset
2 HMI_INTRS 
This bit is used to set the general purposes HMI interrupt error.
1'b0: writing of zero has no effect
1'b1: writing one, HMI_INTREN bit to 1. 
This is performing a bitwise writing of this feature.
 RW 0x0
1 DERRINTS 
This bit is used to set the double-bit error interrupt bit.
Reads reflect DERRINTEN.
1'b0: writing of zero has no effect
1'b1: writing one, DERRINTEN bit to 1.
This is performing a bitwise writing of this feature.
RW 0x0
0 SERRINTS 
This bit is used to set the single-bit error interrupt bit.
Reads reflect SERRINTEN.
1'b0: writing of zero has no effect
1'b1: writing one, this bit will set SERRINTEN bit to 1. 
This is performing a bitwise writing of this feature.
RW 0x0