AUTO_PRECHARGE

         Auto-precharge register

Module Instance	Base Address	Register Address
`ecc_hmc_ocp_slv_block`	`0xFFCFB000`	`0xFFCFB060`

Offset: 0x60

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`															`CTRL` `0x0`

AUTO_PRECHARGE Fields

Bit	Name	Description	Access	Reset
0	`CTRL`	Control bit to drive auto-precharge bit on command interface to the hard memory controller. 1’b0:Default value after reset. Auto-precharge request to the hard memory controller is disabled 1’b1: Every read/write command sent to the hard memory controller has the auto-precharge bit enabled	`RW`	`0x0`

Bit

Name

Description

Access

Reset

CTRL

Control bit to drive auto-precharge bit on command interface to the hard memory controller.  
1’b0:Default value after reset. Auto-precharge request to the hard memory controller is disabled
1’b1: Every read/write command sent to the hard memory controller has the auto-precharge bit enabled

RW

0x0