twhr2_and_we_2_re

Module Instance	Base Address	Register Address
`i_nand_config`	`0xFFB80000`	`0xFFB80100`

Offset: 0x100

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved`		`twhr2` `RW 0x14`						`Reserved`		`we_2_re` `RW 0x32`

twhr2_and_we_2_re Fields

Bit	Name	Description	Access	Reset
13:8	`twhr2`	Signifies the number of controller clocks that should be introduced between the last command of a random data output command to the start of the data transfer.	`RW`	`0x14`
5:0	`we_2_re`	Signifies the number of bus interface clk_x clocks that should be introduced between write enable going high to read enable going low. The number of clocks is the function of device parameter Twhr and controller clock frequency.	`RW`	`0x32`

Bit

Name

Description

Access

Reset

13:8

twhr2

Signifies the number of controller clocks that should be introduced between 
                  the last command of a random data output command to the start of the data transfer.

RW

0x14

5:0

we_2_re

Signifies the number of bus interface clk_x clocks that should be introduced between 
                  write enable going high to read enable going low. The number of clocks is the 
                  function of device parameter Twhr and controller clock frequency.

RW

0x32