fpga2soc_ctrl 

         Converts transactions from fpga2soc to non secure or allows both secure or non-secure transactions by fpga2soc.
Module Instance Base Address Register Address
i_sys_mgr__sysmgr_csr__10d12000__core__SEG_L4_SHR_SystemManager_0x0_0x1000 0x10D12000 0x10D120D8

Size: 32

Offset: 0xD8

Access: RW

Access mode: PRIVILEGEMODE | SECURE

Note: The processor must make a secure, privileged bus access to this register. You can configure processor mode settings in the control registers of the ARM Cortex-A53 MPcore processor. For more information about processor modes, please refer to the ARM Infocenter.

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved_1

RO 0x0

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved_1

RO 0x0

allow_secure

RW 0x1

fpga2soc_ctrl Fields

Bit Name Description Access Reset
31:1 Reserved_1 
Reserved bitfield added by Magillem
 RO 0x0
0 allow_secure 
0 - All Transactions from FPGA2SOC is converted to be Non-Secure
1 - Both Secure and Non-Secure Transactions is allowed by FPGA2SOC.

This signal Impacts traffic with AxUSER ID : 0x04 (FPGA2CCU or FPGA2SOC) and does not impact traffic with AxUSER ID : 0xE0 (FPGA2SDRAM)
 RW 0x1