DVBUSDIS

         Device VBUS Discharge Time Register


Module Instance	Base Address	Register Address
`i_usbotg_0__usb_csr__10b00000__DWC_otg_intreg__SEG_L4_AHB_USB0_0x0_0x40000`	`0x10B00000`	`0x10B00828`

Size: 32

Offset: 0x828

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.


Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`RESERVED` `RO 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`DVBUSDis` `RW 0x17D7`

DVBUSDIS Fields

Bit Name Description Access Reset

31:16

Bit	Name	Description	Access	Reset
31:16	`RESERVED`	RESERVED	`RO`	`0x0`
15:0	`DVBUSDis`	Device VBUS Discharge Time (DVBUSDis) Specifies the VBUS discharge time after VBUS pulsing during SRP. This value equals: VBUS discharge time in PHY clocks / 1, 024 The value you use depends whether the PHY is operating at 30 MHz (16-bit data width) or 60 MHz (8-bit data width). Depending on your VBUS load, this value can need adjustment.	`RW`	`0x17D7`

RESERVED

RESERVED

RO

0x0

15:0

DVBUSDis

Device VBUS Discharge Time (DVBUSDis)
Specifies the VBUS discharge time after VBUS pulsing during
SRP. This value equals:
VBUS discharge time in PHY clocks / 1, 024
The value you use depends whether the PHY is operating at
30 MHz (16-bit data width) or 60 MHz (8-bit data width).
Depending on your VBUS load, this value can need
adjustment.

RW

0x17D7