IC_TXFLR

         Name: I2C Transmit FIFO Level Register
Size: TX_ABW + 1
Address Offset: 0x74
Read/Write Access: Read
This register contains the number of valid data
entries in the transmit FIFO buffer. It is cleared
whenever:
- The I2C is disabled
- There is a transmit abort that is, TX_ABRT bit is
  set in the IC_RAW_INTR_STAT register
- The slave bulk transmit mode is aborted
The register increments whenever data is placed into
the transmit FIFO and decrements when data is
taken from the transmit FIFO.


Module Instance	Base Address	Register Address
`i_i2c_emac_1__i2c_csr__10c02b00__DW_apb_i2c_addr_block1__SEG_L4_SP_i2c3_0x0_0x100`	`0x10C02B00`	`0x10C02B74`

Size: 32

Offset: 0x74

Access: RO

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.


Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`RSVD_TXFLR` `RO 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`RSVD_TXFLR` `RO 0x0`									`TXFLR` `RO 0x0`

IC_TXFLR Fields


Bit	Name	Description	Access	Reset
31:7	`RSVD_TXFLR`	Reserved bits - Read Only	`RO`	`0x0`
6:0	`TXFLR`	Transmit FIFO Level. Contains the number of valid data entries in the transmit FIFO. Reset value: 0x0	`RO`	`0x0`