intrstk

         Interrupt Pending Status without considering the interrupt masks.

Set by hardware and read by software.
Hardware can set the particular bit, even if the corresponding bit is masked by software by intrmsk register.
Sticky behavior. Once set by hardware, the bit will remain set, till cleared by software by writing to intrclr register.


Module Instance	Base Address	Register Address
`i_clk_mgr__clkmgr_csr__10d10000__clkmgr__SEG_L4_SHR_ClockManager_0x0_0x1000`	`0x10D10000`	`0x10D1001C`

Size: 32

Offset: 0x1C

Access: RO

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.


Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`Reserved_4` `RO 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`Reserved_4` `RO 0x0`												`perlocklost` `RO 0x0`	`mainlocklost` `RO 0x0`	`perlockachieved` `RO 0x0`	`mainlockachieved` `RO 0x0`

intrstk Fields


Bit	Name	Description	Access	Reset
31:4	`Reserved_4`	Reserved bitfield added by Magillem	`RO`	`0x0`
3	`perlocklost`	Pending status for periph PLL lock lost interrupt before intr mask	`RO`	`0x0`
2	`mainlocklost`	Pending status for main PLL lock lost interrupt before intr mask	`RO`	`0x0`
1	`perlockachieved`	Pending status for periph PLL lock achieved interrupt before intr mask	`RO`	`0x0`
0	`mainlockachieved`	Pending status for main PLL lock achieved interrupt before intr mask	`RO`	`0x0`