WDT_EOI
Interrupt Clear Register.
| Module Instance | Base Address | Register Address |
|---|---|---|
i_watchdog_2__watchdog_csr__10d00400__wdt_address_block__SEG_L4_SYS1_wd2_0x0_0x100
|
0x10D00400
|
0x10D00414
|
Size: 32
Offset: 0x14
Access: RO
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
|
|
|||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
|
|
||||||||||||||
WDT_EOI Fields
| Bit | Name | Description | Access | Reset |
|---|---|---|---|---|
| 31:1 |
Reserved_1
|
Reserved bitfield added by Magillem |
RO
|
0x0
|
| 0 |
wdt_eoi
|
Clears the watchdog interrupt. This can be used to clear the interrupt without restarting the watchdog counter. |
RO
|
0x0
|