clock_manager 

         Per-Master Security bit for clock_manager
Module Instance Base Address Register Address
noc_fw_l4_sys__ocp_slv__10d21100__l4_sys_scr 0x10D21100 0x10D2114C

Size: 32

Offset: 0x4C

Access: RW

Access mode: SECURE | PRIVILEGEMODE

Note: The processor must make a secure, privileged bus access to this register. You can configure processor mode settings in the control registers of the ARM Cortex-A53 MPcore processor. For more information about processor modes, please refer to the ARM Infocenter.

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

Reserved_3

RO 0x0

axi_ap

RW 0x0

Reserved_2

RO 0x0

fpga2soc

RW 0x0

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

Reserved_1

RO 0x0

mpu

RW 0x0

clock_manager Fields

Bit Name Description Access Reset
31:25 Reserved_3 
Reserved bitfield added by Magillem
 RO 0x0
24 axi_ap 
Security bit configuration for transactions from axi_ap to clock_manager. When cleared (0), only Secure transactions are allowed. When set (1), both Secure and Non-Secure transactions are allowed.
 RW 0x0
23:17 Reserved_2 
Reserved bitfield added by Magillem
 RO 0x0
16 fpga2soc 
Security bit configuration for transactions from fpga2soc to clock_manager. When cleared (0), only Secure transactions are allowed. When set (1), both Secure and Non-Secure transactions are allowed.
 RW 0x0
15:1 Reserved_1 
Reserved bitfield added by Magillem
 RO 0x0
0 mpu 
Security bit configuration for transactions from mpu to clock_manager. When cleared (0), only Secure transactions are allowed. When set (1), both Secure and Non-Secure transactions are allowed.
 RW 0x0