LLINKDBGCNTTRIG 

         LINK DEBUG COUNT TRIGGER REGISTER 
  
  This register is used in conjunction with the LINK_DEBUG_CTRL_REG (LINKDGBCTRL). For more information, refer to the LINK_DEBUG_CTRL_REG description.
Module Instance Base Address Register Address
i_usb31_0__ahb_slave__11000000__DWC_usb31_block_link__SEG_L4_AHB_USB1_0x0_0x100000 0x1100D000 0x1100D05C

Size: 32

Offset: 0x5C

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

stp_cnt

RW 0x0

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

srt_cnt

RW 0x0

LLINKDBGCNTTRIG Fields

Bit Name Description Access Reset
31:16 stp_cnt 
Stop Count
  
  This field is used for triggering purpose based on the selection in the LINK_DEBUG_CTRL_REG.
  
  If this field is zero, link writes out debug data continuously.
  
  SW needs to take into account of the RX RAM size to program this field. (stop_count start_count) is less than total RX RAM size.
 RW 0x0
15:0 srt_cnt 
Start Count
  
  This field is used for triggering purpose based on the selection in the LINK_DEBUG_CTRL_REG
 RW 0x0