GDBGLNMCC
Global Debug LNMCC Register
Bit Bash test should not be done on this debug register.
| Module Instance | Base Address | Register Address |
|---|---|---|
i_usb31_0__ahb_slave__11000000__DWC_usb31_block_link__SEG_L4_AHB_USB1_0x0_0x100000
|
0x1100D000
|
0x1100D054
|
Size: 32
Offset: 0x54
Access: RO
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
|
|
|||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
|
|
||||||||||||||
GDBGLNMCC Fields
| Bit | Name | Description | Access | Reset |
|---|---|---|---|---|
| 31:16 |
LNMCC_LSERC
|
This field indicates the value of link soft error counter for the port selected in the GDBGFIFOSPACE.PortSelect field. This field is for debug purposes only. |
RO
|
0x0
|
| 15:9 |
reserved_16_9
|
Reserved_16_9 |
RO
|
0x0
|
| 8:0 |
LNMCC_BERC
|
This field indicates the bit error rate information for the port selected in the GDBGFIFOSPACE.PortSelect field. This field is for debug purposes only. |
RO
|
0x0
|