GUID

         Global User ID Register
  
  This is a read/write register containing the User ID. The power-on value for this register is specified as the User Identification Register. Power-on value during coreConsultant configuration (parameter DWC_USB31_USERID). This register can be used in the following ways:
   - To store the version or revision of your system;
   - To store hardware configurations that are outside the controller;
   - As a scratch register.


Module Instance	Base Address	Register Address
`i_usb31_0__ahb_slave__11000000__DWC_usb31_block_gbl__SEG_L4_AHB_USB1_0x0_0x100000`	`0x1100C100`	`0x1100C128`

Size: 32

Offset: 0x28

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.


Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`USERID` `RW 0x12345678`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`USERID` `RW 0x12345678`

GUID Fields


Bit	Name	Description	Access	Reset
31:0	`USERID`	USERID Application-programmable ID field.	`RW`	`0x12345678`