DGCMDPAR

         Device Generic Command Parameter Register
  
  This register indicates the device command parameter. This must be programmed before or along with the device command. The available device commands are listed in DGCMD register.


Module Instance	Base Address	Register Address
`i_usb31_0__ahb_slave__11000000__DWC_usb31_block_dev__SEG_L4_AHB_USB1_0x0_0x100000`	`0x1100C700`	`0x1100C710`

Size: 32

Offset: 0x10

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.


Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`PARAMETER` `RW 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`PARAMETER` `RW 0x0`

DGCMDPAR Fields


Bit	Name	Description	Access	Reset
31:0	`PARAMETER`	PARAMETER	`RW`	`0x0`