rf_controller_params Address Map


Module Instance	Base Address	End Address
`i_nand__reg_apb__10b80000__rf_controller_params__SEG_L4_MP_nand_s_0x0_0x10000`	`0x10B80800`	`0x10B80853`


Register	Offset	Width	Access	Reset Value	Description
`ctrl_version`	`0x0`	`32`	`RO`	`0x6019020E`	Register contains release identification number.
`ctrl_features_reg`	`0x4`	`32`	`RO`	`0x3FB3DF03`	Shows available hardware features of the controller
`manufacturer_id`	`0x8`	`32`	`RO`	`0x00000000`	NAND Flash memory device ID information. This register is updated according to ReadID command result during controller initialization phase.
`nf_device_areas`	`0xC`	`32`	`RO`	`0x00001000`	Device areas settings.
`device_params_0`	`0x10`	`32`	`RO`	`0x00000001`	Indicates the device type and the number of LUN-s present in the device.
`device_params_1`	`0x14`	`32`	`RO`	`0x00000000`	Device signature register.
`device_features`	`0x18`	`32`	`RO`	`0x00000000`	Features and optional commands supported by the connected ONFI or Toggle device.
`device_blocks_per_lun`	`0x1C`	`32`	`RO`	`0x00000000`	Number of blocks per LUN present in the ONFI complaint/Toggle device.
`device_revision`	`0x20`	`32`	`RO`	`0x00000000`	Device revision version (valid for ONFI and TOGGLE device).
`onfi_timing_modes_0`	`0x24`	`32`	`RO`	`0x00000000`	Device Timing modes supported by the connected ONFI device (not valid for Toggle mode devices).
`onfi_timing_modes_1`	`0x28`	`32`	`RO`	`0x00000000`	Device Timing modes supported by the connected ONFI device (not valid for Toggle mode devices).
`onfi_iterlv_op_attr`	`0x2C`	`32`	`RO`	`0x00000000`	Interleaved(Multiplane) operation attributes of the connected ONFI device (not valid for Toggle mode devices).
`onfi_sync_opt_0`	`0x30`	`32`	`RO`	`0xFFFF0000`	ONFI synchronous device parameters - part 1 (not valid for Toggle mode devices).
`onfi_sync_opt_1`	`0x34`	`32`	`RO`	`0x00000000`	ONFI synchronous device parameters - part 2 (not valid for Toggle mode devices).
`bch_cfg_0`	`0x38`	`32`	`RO`	`0x40201008`	BCH Engine identification register 0 - available correction strengths.
`bch_cfg_1`	`0x3C`	`32`	`RO`	`0x00826048`	BCH Engine identification register 1 - available correction strengths.
`bch_cfg_2`	`0x40`	`32`	`RO`	`0x04000800`	BCH Engine identification register 2 - available sector sizes.
`bch_cfg_3`	`0x44`	`32`	`RO`	`0x10280806`	BCH Engine identification register 3 - additional information.