2EMAC2_DWCXG_MTL_TCQ6 Address Map

MTL Traffic Class/Queue (#i) Registers.
Module Instance Base Address End Address
u_emac2__apb_reg_config_slave__10830000__DWCXG_MTL_TCQ6__SEG_L4_MP_emac2_s_0x0_0x10000 0x10831400 0x1083147F
Register Offset Width Access Reset Value Description
MTL_TxQ6_Operation_Mode 0x0 32 RW 0x00000000 
The Queue 6 Transmit Operation Mode register establishes the Transmit queue operating modes and commands.
MTL_TxQ6_Underflow 0x4 32 RO 0x00000000 
The Queue 6 Underflow Counter register contains the counter for packets aborted because of Transmit queue underflow.
MTL_TxQ6_Debug 0x8 32 RO 0x00000000 
The Queue 6 Transmit Debug register gives the debug status of various blocks related to the Transmit Queue 6 and Traffic Class 0.
MTL_TC6_ETS_Control 0x10 32 RW 0x00000000 
This register configures the transmission selection algorithm, for Traffic Class 0.This register is not available in single traffic class configuration.
MTL_TC6_ETS_Status 0x14 32 RO 0x00000000 
This register contains the information of average bits transmitted over a slot interval of 10 million bit times, for Traffic Class 0.
MTL_TC6_Quantum_Weight 0x18 32 RW 0x00000000 
The TC1 Quantum or Weights register provides the average traffic transmitted in Traffic Class 1. For TCn, where n = 1 to 7, this register is not available when the number of traffic classes selected is less than n + 1
  
  This register is not available in corresponding Queues 8-15 registers..
MTL_RxQ6_Operation_Mode 0x40 32 RW 0x00000000 
The Queue 6 Receive Operation Mode register establishes the Receive queue operating modes and command.
MTL_RxQ6_Missed_Pkt_Overflow_Cnt 0x44 32 RO 0x00000000 
The Queue 6 Overflow Counter register contains the counter for packets missed because of Receive queue packet flush and packets discarded because of Receive queue overflow.
MTL_RxQ6_Debug 0x48 32 RO 0x00000000 
The Queue 6 Receive Debug register gives the debug status of various blocks related to the Receive queue.
MTL_RxQ6_Control 0x4C 32 RW 0x00000000 
The Queue 6 Receive Control register controls the receive arbitration and passing of received packets to the application.
MTL_RxQ6_Flow_Control 0x50 32 RW 0x00000000 
This register controls the activation and de-activation threshold in the queue for PAUSE/PFC flow control.
MTL_Q6_Interrupt_Enable 0x70 32 RW 0x00000000 
This register contains the interrupt enable bits for Traffic class/Queue 6.
MTL_Q6_Interrupt_Status 0x74 32 RW 0x00000000 
This register contains the interrupt status bits for Traffic class/Queue 6.