IC_ACK_GENERAL_CALL

         Name: I2C ACK General Call Register
Size: 1 bit
Address Offset: 0x98
Read/Write Access: Read/Write
The register controls whether DW_apb_i2c responds
with a ACK or NACK when it receives an I2C
General Call address.
Note :This register is applicable only when the DW_apb_i2c is in slave mode
Dependencies: This register is not applicable  when IC_ULTRA_FAST_MODE=1

      
Module Instance Base Address Register Address
i_i2c_emac_0_DW_apb_i2c_addr_block1 0xFFC02A00 0xFFC02A98
i_i2c_emac_1_DW_apb_i2c_addr_block1 0xFFC02B00 0xFFC02B98
i_i2c_emac_2_DW_apb_i2c_addr_block1 0xFFC02C00 0xFFC02C98

Size: 32

Offset: 0x98

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
Bit Fields
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16

RSVD_IC_ACK_GEN_1_31

RO 0x0

15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

RSVD_IC_ACK_GEN_1_31

RO 0x0

ACK_GEN_CALL

RW 0x1

IC_ACK_GENERAL_CALL Fields

Bit Name Description Access Reset
31:1 RSVD_IC_ACK_GEN_1_31
Reserved bits [31:1] - Read Only
RO 0x0
0 ACK_GEN_CALL
ACK General Call.
When set to 1, DW_apb_i2c responds with a ACK
(by asserting ic_data_oe) when it receives a General Call.
Otherwise, DW_apb_i2c responds with a NACK
(by negating ic_data_oe).
Default Reset value: 0x1, but can be hardcoded by setting the
IC_DEFAULT_ACK_GENERAL_CALL configuration parameter.
Value Description
0x0 Generate NACK for General Call
0x1 Generate ACK for a General Call
RW 0x1