DMATDLR

         DMA Transmit Data Level.
This register is only valid when the DW_apb_ssi is configured with a set
of DMA interface signals (SSI_HAS_DMA = 1). When DW_apb_ssi is not
configured for DMA operation, this register will not exist and writing
to its address will have no effect; reading from its address will
return zero.

Module Instance	Base Address	Register Address
`i_spis_0_ssi_address_block`	`0xFFDA2000`	`0xFFDA2050`
`i_spis_1_ssi_address_block`	`0xFFDA3000`	`0xFFDA3050`

Size: 32

Offset: 0x50

Access: RW

Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.

Bit Fields
31	30	29	28	27	26	25	24	23	22	21	20	19	18	17	16
`RSVD_DMATDLR` `RO 0x0`
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
`RSVD_DMATDLR` `RO 0x0`								`DMATDL` `RW 0x0`

DMATDLR Fields

Bit	Name	Description	Access	Reset
31:8	`RSVD_DMATDLR`	Reserved bits - Read Only	`RO`	`0x0`
7:0	`DMATDL`	Transmit Data Level. This bit field controls the level at which a DMA request is made by the transmit logic. It is equal to the watermark level; that is, the dma_tx_req signal is generated when the number of valid data entries in the transmit FIFO is equal to or below this field value, and TDMAE = 1.	`RW`	`0x0`

Bit

Name

Description

Access

Reset

31:8

RSVD_DMATDLR

Reserved bits - Read Only

RO

0x0

7:0

DMATDL

Transmit Data Level.
This bit field controls the level at which a DMA request is made by the
transmit logic. It is equal to the watermark level; that is, the
dma_tx_req signal is generated when the number of valid data entries
in the transmit FIFO is equal to or below this field value, and TDMAE = 1.

RW

0x0