transfer_mode
Current data transfer mode is Main only, Spare only or Main+Spare.
This information is per bank.
| Module Instance | Base Address | Register Address |
|---|---|---|
| i_nand_status | 0xFFB80400 | 0xFFB80400 |
Size: 32
Offset: 0x0
Access: RO
Important: The value of a reserved bit must be maintained in software. When you modify registers containing reserved bit fields, you must use a read-modify-write operation to preserve state and prevent indeterminate system behavior.
| Bit Fields | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 30 | 29 | 28 | 27 | 26 | 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 |
|
Reserved |
|||||||||||||||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
Reserved |
value3 RO 0x0 |
value2 RO 0x0 |
value1 RO 0x0 |
value0 RO 0x0 |
|||||||||||
transfer_mode Fields
| Bit | Name | Description | Access | Reset |
|---|---|---|---|---|
| 7:6 | value3 |
[list][*]00 - Bank 3 is in Main mode [*]01 - Bank 3 is in Spare mode [*]10 - Bank 3 is in Main+Spare mode[/list] |
RO | 0x0 |
| 5:4 | value2 |
[list][*]00 - Bank 2 is in Main mode [*]01 - Bank 2 is in Spare mode [*]10 - Bank 2 is in Main+Spare mode[/list] |
RO | 0x0 |
| 3:2 | value1 |
[list][*]00 - Bank 1 is in Main mode [*]01 - Bank 1 is in Spare mode [*]10 - Bank 1 is in Main+Spare mode[/list] |
RO | 0x0 |
| 1:0 | value0 |
[list][*]00 - Bank 0 is in Main mode [*]01 - Bank 0 is in Spare mode [*]10 - Bank 0 is in Main+Spare mode[/list] |
RO | 0x0 |