Agilex™ FPGA Development Kits
Altera provides a range of development kits based on Agilex™ FPGAs, which can accelerate the design process. These FPGA and SoC FPGA designs are available in tabletop and PCIe form factors to cater to general-purpose broad market requirements. They support various connector interfaces for transceivers and FPGA workloads. These kits also come equipped with on-board memory and memory upgrade with HPS enabled hardware options.
Featured Development Kits
Agilex 3 FPGA C-Series Development Kit
2x LPDDR4 2GB (x32 component soldered)
Onboard USB Blaster III
Form Factor: Tabletop upgradable to PCIe through optional daughtercard.
Interfaces: 2x DisplayPort 1.4 connectors (1 for TX, 1 for RX); 2x MIPI connectors; 1x Pmod connector; 1x Rasberry Pi 4/5 HAT connector
Agilex 5 FPGA E-Series 065B Development Kit - Modular
HPS Enabled (HW & SW)
DDR4, HPS DDR4 up to 2667 Mbps (component soldered) DDR Memory.
2Gb CFG QSPI FLASH Memory
Form Factor: PCIe
Interfaces: FMC+ x 1; SFP+ x 1; RJ45 x 2; HDMI 2.1; DP 2.0; USB 2/3.1; TX/RX SMA x2 (TSN); IO48, MIPI; PCIe 4.0 x8 edge connector
Agilex 5 FPGA E-Series 065B Development Kit - Premium
HPS Enabled (HW & SW)
LPDDR4, DDR4, HPS DDR4 up to 2667 Mbps (component soldered) DDR Memory.
2Gb CFG QSPI FLASH Memory
Form Factor: Tabletop
Interfaces: FMC+ x 1; QSFP x 2; SFP+ x 2 ; SGMII x 2; RGMII x 1; TX/RX SMA x2; IO48; USB type C and USB2.0; PCIe 4.0 x8 through FMC+ connector
Agilex 7 FPGA M-Series Development Kit - HBM2e Edition (3x F-Tile & 1x R-Tile)
HPS Enabled (HW & SW)
2 x40 DIMM sockets supporting DDR5-5600
1 x40 DDR5-5600 component each for HPS processor memory and for fabric I/O memory
2x 16 LPDDR5 component
Form Factor: Tabletop
Interfaces: F-Tile: 2x QSFPDD optical module; 1x QSFPDD 800 optical module; FMC+ connector; R-Tile: PCIe 5.0 x16 through MCIO connector
Choose the Right Development Kit for Your Project
| Browse the Development Kits | |
|---|---|
|
F-Series |
|
| F-Series Dev Kit (P-Tile and E-Tile) | Use this kit to develop and test PCIe 4.0 design using the PCI-SIG compliant development board. You can also evaluate SoC features and performance using the Hard Processor System (HPS). |
| F-Series Transceiver-SoC Dev Kit (P-Tile & E-Tile) | Use this kit to develop and evaluate E-Tile transceivers up to 58 Gbps and Hard Processor System (HPS). Suitable for Networking and Communication workloads and solutions to utilize Advanced DSP Blocks and high-performance crypto blocks. |
| F-Series Dev Kit (2x F-Tile) | Use this kit as a general-purpose evaluation board in PCIe form factor with Hard Processor System (HPS) features to develop your solution. |
|
I-Series |
|
| I-Series Dev Kit (2x R-Tile & 1x F-Tile) | Use this kit to develop and test PCIe 5.0, CXL v1.1/2.0, high-speed Ethernet up to 400G designs using applicable IP from Intel or third parties. |
| I-Series Transceiver-SoC Dev Kit (4x F-Tile) | Use this kit to evaluate F-Tile FGT and FHT transceiver performance and develop your solutions for flexible protocol support in Video and Vision, JESD204C, Serial Lite IV, CPRI, and other major standards. |
| I-Series Transceiver Dev Kit (6x F-Tile) | Use this kit to evaluate F-Tile FGT and FHT transceiver capabilities and develop your solution targeted for general purpose embedded design as well as Wireline OTN, muxponder, multiplexer, crosspoint switch, Wireless designs with FMC+ connectors. |
|
M-Series |
|
| M-Series Development Kit - HBM2e Edition (3x F-Tile & 1x R-Tile) | Use this kit to evaluate M-series and start designs in memory-bandwidth driven and compute-intensive applications across cloud, network and edge with HPC, storage, wireline, military, radar, video & image processing, and test equipment segments. |
| Browse the Development Kits | |
|---|---|
| E-Series 065B Dev Kit (Premium) | This kit comes with extensive interfaces, PCIe 4.0 connectivity, and expandable memory in a tabletop form factor ideal for embedded and edge applications and more. |
| E-Series 065B Dev Kit (Modular) | This kit comes with a pluggable modular board with a carrier board, allowing a mix/match of devices and connector types to serve a variety of applications. The main modular board comes with its own set of features and connectors allowing it to function standalone. The carrier board expands its capabilities making it suitable for a variety of embedded designs and edge applications in a PCIe form factor. |
| Browse the Development Kits | |
|---|---|
| C-Series Dev Kit | This small form factor, power-efficient kit targets embedded design applications, such as Industrial, Surveillance, Retail, Consumer, Video, and Medical. It comes with LPDDR4 memory, MIPI, DisplayPort, Raspberry Pi 4/5, Pmod connector, and optional PCIe 3.0 daughtercard available for purchase. |
Additional Resources
Design Store
Altera® FPGA design examples provide efficient solutions for common design challenges. Visit the Design Store for Altera® FPGAs and RocketBoards.org to learn more.
Support Community
Find solutions, view comments and engage with other Intel® users around the world.