Arria® V FPGA and SoC FPGA

The Arria® V FPGA family offers the highest bandwidth and delivers the lowest total power for midrange applications, such as remote radio units, 10G/40G line cards, and broadcast studio equipment. There are five targeted variants, including SoC variants with a dual-core ARM* Cortex*-A9 hard processor system (HPS) to best meet your performance, power, and integration needs.

See also: Arria® V FPGA Design SoftwareDesign StoreDocumentation, DownloadsCommunity, and Support

Arria® V FPGA and SoC FPGA

Arria® V GZ FPGA

Offers the lowest power-per-bandwidth for midrange applications, and are ideal for power-sensitive designs that require transceivers up to 12.5 Gbps.

Arria® V GT FPGA

Offers the lowest total power for mid-range applications and the lowest power transceivers for speeds up to 10.3125 Gbps.

Arria® V GX FPGA

Offers the lowest total power for mid-range applications and the lowest power transceivers for speeds up to 10.3125 Gbps.

Arria® V ST SoC FPGA

Intel® SoC FPGA with ARM*-based HPS and 10.3125 Gbps transceivers.

Arria® V SX SoC FPGA

Intel® SoC FPGA with ARM*-based HPS and 6.5536 Gbps backplane-capable transceivers.

Benefits

Industry's Lowest Power

Arria® V GZ FPGAs offer the lowest power-per-bandwidth for midrange applications, and are ideal for power-sensitive designs that require transceivers up to 12.5 Gbps. At 10G data rates, Arria® V GZ FPGAs consume less than 180 mW per channel and at 12.5 Gbps consume less than 200 mW per channel. Arria® V GZ FPGAs also offer a lower static power offering with a -3L speed grade.

Arria® V GX and GT FPGAs offer the lowest total power for mid-range applications by using the 28 nm low power process to deliver the lowest static power, offering the lowest power transceivers for speeds up to 10.3125 Gbps, and providing superior fabric with hard IP designed to lower dynamic power. Arria® V devices provide a 40% on average power reduction compared to the previous generation of midrange FPGAs.

Customizable ARM* Processor-Based SoCs

Intel® SoCs let you reduce system power, system cost, and board space by integrating a hard processor system (HPS) – consisting of processors, peripherals, and memory controller – with the FPGA fabric using a high-bandwidth interconnect backbone. The combination of the HPS with Intel's 28 nm low-power FPGA fabric provide the performance and ecosystem of an applications-class ARM* processor with the flexibility and digital signal processing (DSP) richness of the Arria® V FPGAs.

Benefits of Arria® V SoC FPGA

Not All SoC FPGAs Are Created Equal. Architecture Matters

SoC FPGAs are more than the sum or their parts. It is critically important to understand how the processor and FPGA systems work together to accomplish each task. When you choose an SoC FPGA for your next design, architecture matters. Intel® SoC FPGAs are designed to:

  • Preserve the flexibility of processor boot / FPGA configuration sequence, system response to processor reset, and independent memory interfaces of a two-chip solution.
  • Maintain data integrity and reliability with integrated ECC.
  • Protect DRAM memory shared by the processor and FPGA with an integrated memory protection unit.
  • Enable system-level debug with Intel's FPGA-adaptive debugging for unmatched visibility and control of the whole device.

Learn how to choose the right SoC FPGA for your application from our extensive set of resources, including a short series of videos from processor expert Jim Turley.

Learn more

Easy Migration Path to Intel® Arria® 10 SoC FPGA

The Arria® V SoC FPGA and Intel® Arria® 10 SoC FPGA utilize the same dual-core ARM* Cortex*-A9 MPCore* processor. Therefore, when your Arria® V SoC FPGA design is ready for a performance upgrade you can easily migrate your software to the Intel® Arria® 10 SoC FPGA. Based on the TSMC 20 nm process, the Intel® Arria® 10 SoC FPGA offers for a performance upgrade path for Arria® V SoC FPGA designs with easy software migration.

Industry’s Highest Performance 28 nm SoC FPGA

  • Up to 1.05 GHz dual-core ARM* Cortex*-A9 MPCore* processor
  • Four hardened 32-bit memory controllers with up to 533 MHz memory bus speed and optional error correction code (ECC)
  • Processor to FPGA interconnect with >125 Gbps peak total bandwidth

Lowest System Power for Midrange Applications

  • Integration of multiple components into a single chip
  • Lowest power transceivers with speeds up to 10.3125 Gbps
  • Based on low power TSMC 28LP process

Multiple Benefits to System Cost

Features

Flexible Transceivers

Whether you need a few channels of transceivers, or up to 36, Arria® V FPGAs provides transceiver solutions to meet your performance and power requirements to deliver exactly what you need to succeed.

Variable-Precision DSP Block

Arria® V FPGAs and SoCs feature the industry's first variable-precision digital signal processing (DSP) block.

SoC FPGA Hard Processor System

Intel® SoCs integrate an ARM* -based hard processor system (HPS) consisting of processor, peripherals, and memory interfaces with the FPGA fabric using a high-bandwidth interconnect backbone.

Arria® V SoC FPGA Hard Processor System Overview

Device All Arria® V SoC FPGA Devices (SX, ST)
Processor

Dual-core ARM* Cortex*-A9 MPCore* processor with ARM* CoreSight* debug and trace technology

  • 1.05 GHz CPU clock rate in -I3 speed grade
  • 925 MHz CPU clock rate in -C4 speed grade
  • 800 MHz CPU clock rate in -C5, -I5 speed grades
  • 700 MHz CPU clock rate in -C6 speed grade
Coprocessors ARM* NEON* media processing engine with Vector Floating-Point (VFP) v3 double-precision floating point unit for each processor, Snoop Control Unit (SCU), Acceleration Coherency Port (ACP)
Level 1 cache 32 KB L1 instruction cache, 32 KB L1 data cache
Level 2 cache 512 KB shared L2 cache
On-chip memory 64 KB on-chip RAM, 64 KB on-chip ROM
HPS hard memory controller

Multiport SDRAM controller with support for DDR2, DDR3, DDR3L, and LPDDR2 with optional error correction code (ECC) support
533 MHz/1066 Mbps external memory interface
User-configurable memory width of 8, 16, 16+ECC, 32, 32+EEC
Up to 4 GB address range, with built-in memory protection control

Quad serial peripheral interface (SPI) flash controller Supports SPIx1, SPIx2, or SPIx4 (quad SPI) serial NOR flash devices
Up to four chip selects
SD/SDIO/MMC controller

Supports SD, eSD, SDIO, eSDIO, MMC, eMMC, and CE-ATA with integrated DMA

NAND flash controller Supports 8 bit ONFI 1.0 NAND flash devices
Programmable hardware ECC for Single-Level Cell (SLC) and Multi-Level Cell (MLC) devices
Ethernet media access controller (EMAC) 2 x 10/100/1000 EMAC with RGMII external PHY interface and integrated DMA
USB On-The-Go controller (OTG) 2 x USB 2.0 OTG controllers with ULPI external PHY interface and integrated DMA
UART controller 2 x UART 16550 compatible
SPI controller 2 x SPI masters
2 x SPI slaves
I2C controller 4 x I2C
General-purpose I/O (GPIO) Up to 71 GPIO and 14 input-only pins, with digital de-bounce and configurable interrupt mode
Direct memory access (DMA) controller 8-channel direct memory access (DMA)
Supports flow control with 31 peripheral handshake interfaces
Timers Private interval and watchdog timer for each processor
Global timer for processor subsystem
4X general-purpose timers
2X watchdog timers
Maximum HPS I/O 208
HPS phased-locked loops (PLLs) 3

Ecosystem

Intel® SoC FPGAs are ARM* processor-based and inherit the strength of the ARM* ecosystem. Intel, our ecosystem partners, and the Intel® SoC FPGA user community provide a wide range of options to meet your SoC FPGA development needs. There are a number of options for operating systems, development tools, intellectual property (IP) cores, and professional services. Many are provided by ecosystem partners.

Operating Systems

Arria® V SoC FPGA includes a sophisticated high-performance multicore ARM* Cortex*-A9 MPCore* processor. This processor can be used for a wide range of functions from very simple bare-metal applications running on one of the available cores to high-bandwidth, low-latency , real-time operations.

Development Tools

For professional quality development tools including JTAG debuggers and instruction trace functions.

IP Cores

Intel® SoC FPGAs are supported by a wide range of Intel® FPGA and third-party soft Intellectual Property (IP) cores. These blocks can be instantiated in the FPGA portion of the SoC FPGA device.

Nios® II Soft Processor

The Nios® II processor, the world's most versatile processor, according to Gartner Research, is the most widely used soft processor in the FPGA industry.

Design Services Network

Design Service Network (DSN) members offer an extensive portfolio of design services, IP, and products that can help customers meet challenging product development needs, lower risk, and accelerate time to market.

Boards

Intel® SoC FPGA-based boards are available from Intel and ecosystem partners. Boards can be standalone or system on module (SoM) configuration.

Applications

Wireless Communications

Remote radioheads, RF cards and channel cards, Mobile backhaul.

Wireline Communications

20G/40G bridging and switching, 20G packet processing, Gigabit-capable passive optical network (GPON).

Broadcast

Digital modulation equipment (including EdgeQAM and satellite and terrestrial broadcast), Pro audio/visual (A/V) switches, Video conferencing, PCIe capture and cameras.

Computer & Storage

Custom storage, Flash memory cache, Plug-in cards.

Military

Guidance control, Tactical electronic warfare, Custom storage, Electro-optical/infrared (OR/IR) systems.

Test & Medical

Ultrasound, CT scanning, Other diagnostic imaging, Portable and wireless tests.

Learn more about test

Learn more about medical

Industrial & Consumer

Human-machine interface, I/O companion, High-end display, High-end video surveillance.

Learn more about industrial

Learn more about consumer

Arria® V SoC FPGA devices have been designed to meet the performance, power, and cost requirements for applications such as:

  • Wireless infrastructure equipment including remote radio units and mobile backhaul
  • Wireline 10G/40G line cards, bridges and aggregation, GPON
  • Broadcast studio and distribution equipment including professional A/V and video conferencing
  • Military guidance, control, and intelligence equipment
  • Test and measurement equipment
  • Medical imaging equipment
  • Multifunction printers

Design Tools

Intel® Quartus® Prime Software Suite

Intel® Quartus® Prime Software Suite provides everything you need to design with Intel® SoC FPGAs. It is a complete development package that comes with a user-friendly GUI and technology to help you turn your ideas into reality. The Intel® Quartus® Prime software includes productivity tools to make it easy to build your design, such as:

  • Intel® FPGA SDK for OpenCL™ Technology
  • Platform Designer (formerly Qsys)
  • System Console debugging toolkit
  • Transceiver Toolkit
  • Timing Analyzer
  • Power Analyzer

Learn more

Intel® SoC FPGA Embedded Development Suite

Jump start your firmware and application software development with our Intel® SoC FPGA Embedded Development Suite (SoC EDS), a comprehensive tool suite with:

  • Development tools
  • Utility programs
  • Run-time software
  • Application examples

At the heart of the SoC EDS is the exclusive ARM* Development Studio 5* (DS-5*) Intel® SoC FPGA Edition. This toolkit combines the ARM* DS-5* advanced multicore debugging capabilities with FPGA-adaptivity for unprecedented full-chip debugging visibility and control.

Learn more