Intel® RSTCLI Pro for Intel® Optane™ Memory



The Intel® RST CLI Pro utility can be used to perform basic acceleration operations on Intel® Optane memory capable systems.

Available Downloads

  • Windows 10, 64-bit*
  • Size: 1,012.7 KB
  • SHA1: 7C2D4908B33726C133D3DA97DFFE11724100FFE1

Detailed Description

Intel® Rapid Storage Technology (Intel® RST) CLI Pro is a command line utility for Windows® 10 that can be used to perform basic operations on Intel® Optane™ memory capable systems such as the following:

  • Enable acceleration
  • Disable acceleration
  • View progress of Enable/Disable action


  • This is a management utility for Intel® Optane™ memory capable systems and supported usages. Please see the Readme for usage details and the Installation Guide (Minimum Requirements Section 1.2) for complete requirement details
  • The Intel® RST Windows* driver (included with this package) must be installed before using this application, as the version of the application and driver must match:
    • Unzip the ‘’ package
    • Right-click the Windows Start menu and open the Device Manager
    • Under ‘Storage Controllers’ right-click on the ‘Intel® Chipset SATA/PCIe RST Premium Controller’
    • Select ‘Update driver’
    • In the Open Dialog, select ‘Browse my computer for driver software’
    • Browse to the location of the f6flpy folder unzipped earlier and click ‘Next’

The content on this page is a combination of human and computer translation of the original, English-language content. This content is provided for your convenience and for general information only and should not be relied upon as complete or accurate. If there is any contradiction between the English-language version of this page and the translation, the English-language version will govern and control. View the English-language version of this page.