Intel® Server Board S2600ST Family BIOS and Firmware Update Package for UEFI

19040
5/12/2018

Introduction

This download record contains the BIOS and firmware update package for the Intel® Server Board S2600ST Family for UEFI* (00.01.0013), read firmware dependencies in requirements section

Available Downloads

  • OS Independent
  • Size: 24.4 MB
  • SHA1: E23CE2A7DD08D1683FD809BE0F960E93125844CD

Detailed Description

System firmware requirements

To update the system firmware stack to the versions included in this update package, the currently loaded system firmware stack on the system must meet the following:

System BIOS: 00.01.0009 or later
ME Firmware: 04.00.04.288 or later
BMC Firmware: 1.29.7d703f59 or later
FRUSDR: 1.24 or later

Failure to get to the required firmware stack, may cause unexpected results.

If the system doesn't currently meet the above system firmware requirements, you must download a previously posted System Update Package (SUP) and update the system to the preceding described firmware revisions before updating the system to the firmware stack included in this package.

Important: BIOS 00.01.2001 is an earlier version than 00.01.0004. If you have this version, update to 00.01.0004 first, and then follow the appropriate path to get to this release.

This update package includes the following production-level system firmware updates:

System BIOS: 00.01.0013
ME Firmware: 04.00.04.294
BMC Firmware: 1.43.91f76955
FRUSDR: 1.28

Firmware update tools

iFlash32_V14_1_Build10
FWPIAUPD_v14_1_Build12
FRUSDR_V14_1_Build11

Supported products

Intel® Server Board S2600ST Family

Important notes

  • Downgrading below 1.43.660a4315 is not supported due to a security revision change.
  • All updates provided in this package are installed using the embedded uEFI operating environment only.
  • Don't modify any of the script files. The scripts as written will provide the most reliable update experience.
  • If for any reason the System BIOS, BMC Firmware, or FRU and SDR data need to be re-installed after the initial update has been performed, the package does include standalone script files that can be run individually. These files include: UpdBIOS.nsh, UpdMe.nsh, UpdFD.nsh, fwUpdateBMC.nsh, and updS2600STB.nsh.

Don't use these files until after the system has been updated initially using the Startup.nsh file.

Warning: This release has the BMC PCIe bridge disabled. This will cause the majority of operating systems to fail at boot as they stall during video driver initialization.

Steps to recover a failing operating system:

Linux* variants (one of the below):

  1. Ensure that the modprobe.blacklist=ast parameter is set in your boot loader (grub).
  2. Ensure that you are using a kernel version v4.10 or newer.


For Red Hat* Enterprise Linux* v7.3, refer to the included RHEL73_InstallationGuide_Rev1.00.pdf.

For SUSE* Linux* Enterprise Server v12 SP1 or SP2, refer to the included SLES12_InstallationGuide_Rev1.00.pdf.

Windows* variants:
Boot to safe mode, and load aspeed video driver v1.03 or greater and reboot.
For Windows* Server 2016, refer to the included WinSrv16_InstallationGuide_Rev1.00.pdf.

This download is valid for the product(s) listed below.

The content on this page is a combination of human and computer translation of the original, English-language content. This content is provided for your convenience and for general information only and should not be relied upon as complete or accurate. If there is any contradiction between the English-language version of this page and the translation, the English-language version will govern and control. View the English-language version of this page.