This download contains the System Update Package for the Intel® Server Board S2600BP Family for Intel® OFU Utility and WinPE*. Read firmware dependencies in requirements section.
- OS Independent
- Size: 35 MB
- SHA1: 6AC0AEDA4438D3A66143CB53579E1AF12F493689
Do NOT use this OS-based Software Update Package (SUP) if the system is an Intel® Data Center Block for Nutanix* Enterprise Cloud, the said system relies on Nutanix’s Prism Life Cycle Manager for any firmware updates. For more information, visit Nutanix* Life Cycle Manager page. For a list of hardware and firmware compatibility, visit the Nutanix* Hardware and Firmware compatibility page.
This download contains the BIOS and firmware update package for the Intel® Server Board S2600BP Family for Intel® One Boot Flash Update (Intel® OFU) Utility and Windows* Preboot Execution Environment (WinPE*).
You can use this package to update the BIOS, BMC, ME, FD, and DCPMM DIMMs.
This Firmware Update Package supports 1st and 2nd generation Intel® Xeon® Scalable Processor families.
This update package includes the following production-level system firmware updates:
- System BIOS - R02010012
- ME Firmware - 04.01.04.381
- BMC Firmware - 2.48.89b32e0d
- FRUSDR - 1.45
- Intel® Optane™ DC Persistent Memory Firmware (DCPMM) - 01.02.00.5435
To update the system firmware stack to the versions included in this update package, the currently loaded system firmware stack on the system must meet the following:
- System BIOS - 02.01.0011
- ME Firmware - 04.01.04.339
- BMC Firmware - 2.42.d0b788a4
- FRUSDR - 1.44
Failure to get to the required firmware stack, may cause unexpected results.
OFU utility with flashupdt tool does not support DCPMM FW update, please refer to "DCPMM_Update_Intructions.txt" part of this package for instructions to update DCPMM.
This SFUP package includes the FW 01.02.00.5417 for Intel® Optane™ DC Persistent Memory (DCPMM), if you received your DCPMM DIMMs with a different FW, please install this one.
Starting from BMC 2.22.59c3b83a, when KCS Policy Control Mode is configured as "Deny ALL" on BMC EWS, BMC and FRUSDR cannot be upgraded/downgraded as expected behavior. Updates can still be performed via Redfish or BMC EWS
BMC and FRUSDR versions cannot be downgraded to backwards versions.
For Windows and WinPE, the user needs to exit/ close the command prompt after each update.
Refer first to the release notes for detailed information on installation instructions, supported hardware, what is new, bug fixes, and known issues before starting the firmware update.
- You must install this update package using Intel® One Boot Flash Update (Intel® OFU) v14.1 build 19 or later.
This download is valid for the product(s) listed below.
- Intel® Compute Module HNS2600BPS
- Intel® Compute Module HNS2600BPB
- Intel® Compute Module HNS2600BPQ
- Intel® Server Board S2600BPQ
- Intel® Compute Module HNS2600BPS24
- Intel® Compute Module HNS2600BPQ24
- Intel® Compute Module HNS2600BPB24
- Intel® Server Board S2600BPS
- Intel® Server Board S2600BPB
- Intel® Compute Module HNS2600BPBLC24
- Intel® Compute Module HNS2600BPB24R
- Intel® Compute Module HNS2600BPBLC24R
- Intel® Compute Module HNS2600BPQ24R
- Intel® Compute Module HNS2600BPSR
- Intel® Compute Module HNS2600BPBR
- Intel® Server Board S2600BPBR
- Intel® Server Board S2600BPQR
- Intel® Compute Module HNS2600BPS24R
- Intel® Compute Module HNS2600BPBLC
- Intel® Server Board S2600BPSR
- Intel® Compute Module HNS2600BPQR
- Intel® Compute Module HNS2600BPBLCR
Product and Performance Information
Intel is in the process of removing non-inclusive language from our current documentation, user interfaces, and code. Please note that retroactive changes are not always possible, and some non-inclusive language may remain in older documentation, user interfaces, and code.