Intel® Integrator Toolkit

18786
1/22/2020

Introduction

Intel® Integrator Toolkit is a command line utility used to customize BIOS on Intel® NUC and Intel® Compute Stick products.

Available Downloads

  • OS Independent
  • Size: 847.3 KB
  • SHA1: 8AC8A544E131DEBD091D89D5B0841DA9F23A8286

Detailed Description

Purpose

The Intel® Integrator Toolkit is a UEFI command line utility that is designed for integrators who are customizing the BIOS of Intel® NUC and Intel® Compute Stick products. 

Notes

If any of the features are not working correctly, make sure the BIOS is updated to the latest version.

The ITK6.efi program must be run from a FAT32-formatted USB drive. The system where you run the utility (an Intel NUC or Intel Compute Stick) must have the Internal UEFI shell option enabled in the BIOS.

To enable the Internal UEFI shell on Intel NUC:

  1. Press F2 during boot to enter BIOS Setup.
  2. Go to Advanced -> Boot -> Boot Configuration.
  3. In the Boot Devices pane, enable Internal UEFI Shell
  4. Press F10 to save and exit BIOS Setup.

To enable the internal UEFI shell on Intel Compute Stick:

  1. Press F2 during boot to enter BIOS Setup.
  2. Go to Configuration.
  3. Enable Internal UEFI Shell.
  4. Press F10 to save and exit BIOS Setup.

 

Intel® Integrator Toolkit is only supported by the Visual BIOS-based products. If your Intel® NUC is not included in the product list below, download and use Intel® AptioV Integrator Tools instead.

 

This download is valid for the product(s) listed below.

The content on this page is a combination of human and computer translation of the original, English-language content. This content is provided for your convenience and for general information only and should not be relied upon as complete or accurate. If there is any contradiction between the English-language version of this page and the translation, the English-language version will govern and control. View the English-language version of this page.