Intel® QSFP+ Configuration Utility - ESX* - Final Release

18659
6/6/2019

Introduction

This download record includes Intel® QSFP+ Configuration Utility version 2.34.4.0 for ESX*.

Available Downloads

  • VMware*
  • Size: 2.6 MB
  • SHA1: 45DF74BD4B2156E71B7207736C75990B5992F20C

Detailed Description

Overview 

The Intel® QSFP+ Configuration Utility is a command line utility that allows
users to change the link type of the installed QSFP+ module. The supported types
are defined within the adapter's NVM. This utility displays only the devices that
potentially support QSFP+ reconfiguration. Only one port per device is displayed,
since changes affect the device as a whole, not individual ports.

NOTE: A reboot is required to apply configuration changes. On systems running
Oracle Solaris* 11, you must perform a full reboot, not a fast reboot.


Supported operating systems

Microsoft Windows Server* 2008 R2 and later
Windows PE* 3.0 and later
Linux Kernel* 2.6/3.x and later
Red Hat* Enterprise Linux* 6.5 and later
SUSE Linux Enterprise Server* 10 SP4 and later
UEFI 2.1 and later
Oracle Solaris* 11
VMWare* ESXi* 5.5 and later
FreeBSD* 10.1 and later

Notes

  • On systems running Linux, FreeBSD, Solaris, or ESXi, the base driver must be
    present for QCU to function correctly.
  • On Microsoft Windows* systems, if the driver required to run the tool is not present on the system, it will automatically be installed when QCU is run.

The content on this page is a combination of human and computer translation of the original, English-language content. This content is provided for your convenience and for general information only and should not be relied upon as complete or accurate. If there is any contradiction between the English-language version of this page and the translation, the English-language version will govern and control. View the English-language version of this page.