Intel® QSFP+ Configuration Utility - FreeBSD* - Final Release

18658
11/9/2018

Introduction

This download record includes Intel® QSFP+ Configuration Utility version 2.32.20.28 for FreeBSD*.

Available Downloads

  • OS Independent, FreeBSD*
  • Size: 1.5 MB
  • SHA1: 061F6A94B9C43004E1142055412F4ACF05BA5713

Detailed Description

Overview 

The Intel® QSFP+ Configuration Utility is a command line utility that allows
users to change the link type of the installed QSFP+ module. The supported types
are defined within the adapter's NVM. This utility displays only the devices
that potentially support QSFP+ reconfiguration. Only one port per device is
displayed, since changes affect the device as a whole, not individual ports.

NOTE: A reboot is required to apply configuration changes. On systems running
Oracle* Solaris* 11, you must perform a full reboot, not a fast reboot.


Supported operating systems

Microsoft Windows Server* 2008 R2 and later
Windows PE 3.0 and later
Linux* Kernel 2.6/3.x and later
Red Hat* Enterprise Linux* 6.5 and later
SUSE* Linux Enterprise Server 10 SP4 and later
UEFI 2.1 and later
Oracle* Solaris* 11
VMWare* ESXi* 5.5 and later
FreeBSD 10.1 and later

Notes:
- On systems running Linux, FreeBSD, Solaris, or ESXi, the base driver must be
present for QCU to function correctly.

- On Microsoft Windows systems, if the driver required to run the tool is not
present on the system, it will automatically be installed when QCU is run.

The content on this page is a combination of human and computer translation of the original, English-language content. This content is provided for your convenience and for general information only and should not be relied upon as complete or accurate. If there is any contradiction between the English-language version of this page and the translation, the English-language version will govern and control. View the English-language version of this page.