Near Field Communication (NFC) GPIO Driver for Windows® 10 for Intel® NUC

18543
7/17/2015

Introduction

Installs version 8.0.1.0 of the Near Field Communication (NFC) GPIO driver for the Intel® NUC using Windows® 10, 64-bit.

Available Downloads

  • Windows 10, 64-bit*, Windows 10, 32-bit*
  • Size: 19.1 MB
  • SHA1: 163080E10875B7443F70B46BE6B0358945EFEB75

Detailed Description

Purpose

This download record provides the Near Field Communication (NFC) GPIO driver for the NFC controller on the Intel® NUC.

Notes:

  • If you don't plan to enable NFC in BIOS, you do not need to install this driver.
  • If you plan to install an NFC module on the Intel NUC, you'll need to install both this driver and the driver from the third-party manufacturer of the NFC module you use.
  • This will be the last driver for NFC. The NFC header has been removed from all Intel NUC Kits beginning in June 2016. See the revision history in the Technical Product Specification for all specification changes.

 

The content on this page is a combination of human and computer translation of the original, English-language content. This content is provided for your convenience and for general information only and should not be relied upon as complete or accurate. If there is any contradiction between the English-language version of this page and the translation, the English-language version will govern and control. View the English-language version of this page.