Non-Volatile Memory (NVM) Update Utility for Intel® Ethernet Network Adapter 700 Series

18190
2/27/2015

Introduction

NVM Update Utility for Intel® Ethernet Converged Network Adapter XL710 & X710 Series.

Available Downloads

  • OS Independent
  • Size: 47.4 MB
  • SHA1: A516CAE3AF7695DE3C91F61B73E70EE422BAEF84

Detailed Description

Overview
This package contains all the required files to update the NVM on the Intel® Ethernet Adapters in your system. It contains the NVMUpdate utility, configuration file, updated NVM binaries, and required driver files.

Not sure if this is the right driver or software for your component? Run Intel® Driver & Support Assistant to automatically detect driver or software updates.

Usage guides:

Intel® Ethernet NVM Update Tool: Usage Guide for Windows*

Intel® Ethernet NVM Update Tool Quick Usage Guide for Linux*

Intel® Ethernet NVM Update Tool: Quick Usage Guide for EFI

Intel® Ethernet NVM Update Tool: Quick Usage Guide for VMware ESX

Intel® Ethernet NVM Update Tool: Quick Usage Guide for FreeBSD


Limitations and Prerequisites

This package should only be used on Intel branded adapters. Please contact your OEM vendor for an appropriate package. 

See list of manufacturers’ Support websites.

This package only updates the NVM image. It does not update the preboot image. To update your preboot image, please download the appropriate package.

DO NOT:
- Power down your system during the NVM Update.
- Remove the NIC before the NVM Update completes.
- Interrupt the NVM Update in any other way.

Doing so may make your device unusable.

 

Linux Requirements

The base driver for your NIC must already be installed.

UEFI Requirements

Create a bootable disk or other media and extract the update package onto the media.
Boot your system from the media and run the tool from there.


Updating Your NVM Using Interactive Mode

1. Extract the update package into a temporary folder.
2. Start the nvmupdate utility by running the executable.
For example, on an x64 Microsoft* Windows* system, type:

nvmupdatew64e

On an x64 Linux* system, type:

nvmupdate64e

3. Follow the prompts to update the NVM image on the desired device.

 

Using a Script

You can use a script to perform an inventory of all the Intel Ethernet devices in the system or update the Intel Ethernet devices in the system.

Update script example:

nvmupdate64e –u –l –o update.xml –b –c nvmupdate.cfg

This causes NVMUpdate to check the installed Intel Ethernet devices against those contained in nvmupdate.cfg. If a device contains an NVM version older than that specified in the config file, the utility will update the device's NVM. It
will create an xml file containing the results of the update. Note that –b is optional. Specifying –b will create a backup of the current NVM image(s). This may add about 30% to the tools execution time.

Inventory script example:

nvmupdate64e –i –l –o inventory.xml

This causes NVMUpdate to perform an inventory of all the Intel Ethernet devices in the system and creates an output file (called inventory.xml) of the results of the inventory.

 

Results

NVMUpdate will return an exit code of zero if the update completed successfully.

Product and Performance Information

1

Intel is in the process of removing non-inclusive language from our current documentation, user interfaces, and code. Please note that retroactive changes are not always possible, and some non-inclusive language may remain in older documentation, user interfaces, and code.