F-Tile Dynamic Reconfiguration Design Example User Guide

ID 710582
Date 4/11/2024
Public
Document Table of Contents

1. Quick Start Guide

Updated for:
Intel® Quartus® Prime Design Suite 24.1

The F-Tile Dynamic Reconfiguration IP provides a simulation testbench and hardware design example that supports compilation and simulation. When you generate the design example, the parameter editor automatically creates the files necessary to simulate, compile, and test the design in hardware.

Intel® also provides a compilation-only example project that you can use to quickly estimate IP core area and timing.

Figure 1. Development Steps for the Design Example
The F-Tile Dynamic Reconfiguration design example supports the following design variants:
Table 1.  Supported Design Example Variants
Protocol Base Variant Target Variants
CPRI 24G CPRI with RS-FEC 1.2G CPRI
2.4G CPRI
3G CPRI
4.9G CPRI
6G CPRI
9.8G CPRI
10G CPRI
10G CPRI with RS-FEC
12G CPRI
12G CPRI with RS-FEC
24G CPRI
24G CPRI with RS-FEC
Ethernet 100G-4 with RS-FEC 100G-4 with RS-FEC
100G-4
100G-2 with RS-FEC
2x50G-1 with RS-FEC
4x25G-1 with RS-FEC
4x25G-1
25G-1 with RS-FEC 25G-1 with RS-FEC
10G-1
400G-8 with RS-FEC 400G-8 with RS-FEC
2x200G-4 with RS-FEC
4x100G-2 with RS-FEC
100G-4 with RS-FEC and PTP 1 100G-4 with RS-FEC and PTP
100G-4 with PTP
100G-2 with RS-FEC and PTP
2x50G-1 with RS-FEC and PTP
4x25G-1 with RS-FEC and PTP
4x25G-1 with PTP
25G-1 with RS-FEC and PTP 2 25G-1 with RS-FEC and PTP
10G-1 with PTP
400G-8 with RS-FEC and PTP2 400G-8 with RS-FEC and PTP
2x200G-4 with RS-FEC and PTP
4x100G-2 with RS-FEC and PTP
FHT 400G-4 with RS-FEC FHT 400G-4 with RS-FEC
FHT 1x200G-4 with RS-FEC
FHT 2x200G-2 with RS-FEC
FHT 2x100G-2 with RS-FEC
FHT 4x100G-1 with RS-FEC
PMA/FEC Direct PHY 53.125G 53.125G
53.125G with RS-FEC
25.7815G
24.33024G
10.3125G
10.1376G
9.8304G
4.9152G
2.4576G
400G-8 with RS-FEC 1x400G-8 with RS-FEC (PAM4) FEC Direct (544,514)
2x200G-4 with RS-FEC (PAM4) FEC Direct (544,514)
2x100G-4 with RS-FEC (NRZ) FEC Direct (528,514)
Ethernet to CPRI 25G-1 with RS-FEC 25G-1 with RS-FEC
10G-1
24G CPRI with RS-FEC
10G CPRI
9.8G CPRI
4.9G CPRI
2.4G CPRI
25G-1 with RS-FEC (with 1GE) 25G-1 with RS-FEC
10G-1
1G-1
24G CPRI with RS-FEC
10G CPRI
9.8G CPRI
4.9G CPRI
2.4G CPRI

25G-1 PTP2 with RS-FEC (with 1GE PTP)

25G-1 with RS-FEC and PTP
10G-1 with PTP
1G-1 with PTP
24G CPRI with RS-FEC
10G CPRI
9.8G CPRI
4.9G CPRI
2.4G CPRI
Note: Ethernet variants support AN/LT as optional.
1 Basic Accuracy Mode
2 Advanced Accuracy Mode