F-Tile SDI II FPGA IP Design Example User Guide

Download PDF
ID 710496
Date 10/21/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents
Document Table of Contents x
1. F-Tile SDI II Intel FPGA IP Design Example Quick Start Guide 2. Design Example Detailed Description 3. F-Tile SDI II Intel FPGA IP Design Example User Guide Archives 4. Document Revision History for the F-Tile SDI II Intel FPGA IP Design Example User Guide
1. F-Tile SDI II Intel FPGA IP Design Example Quick Start Guide x
1.1. Directory Structure 1.2. Generating the Design 1.3. Simulating the Design 1.4. Compiling and Testing the Design in Hardware 1.5. Design Example Parameters
2. Design Example Detailed Description x
2.1. Features 2.2. Hardware and Software Requirements 2.3. Functional Description 2.4. Simulation 2.5. Hardware Testing 2.6. Interface Signal
2.3. Functional Description x
2.3.1. Design Components 2.3.2. Clocking Scheme
2.3.2. Clocking Scheme x
2.3.2.1. Clocking Scheme Component
2.4. Simulation x
2.4.1. Testbench Components 2.4.2. Test Description
2.5. Hardware Testing x
2.5.1. Parallel loopback 2.5.2. Serial loopback
1. F-Tile SDI II Intel FPGA IP Design Example Quick Start Guide
2. Design Example Detailed Description
3. F-Tile SDI II Intel FPGA IP Design Example User Guide Archives
4. Document Revision History for the F-Tile SDI II Intel FPGA IP Design Example User Guide

2.1. Features

  1. LED status for early debugging stage with RX or TX only options.
  2. To use RX or TX only components, remove the irrelevant blocks from the simplex version serial loopback design as described in the following table.
    Table 5.  Features
    User Require Preserve Remove
    RX only
    • RX top
    • Reference and System PLL Clocks IP
    • DR IP & DR arbiter (if present)
    • Device Init
    		 TX Top
    TX only
    • TX top
    • Reference and System PLL Clocks IP
    • DR IP & DR arbiter (if present)
    • Device Init
    		 RX Top
Figure 12. Components required for TX or RX only design on Intel® Agilex™ Device
Note: Refer to Clocking Scheme for the Reference and System PLL Clocks IP connections.
Level Two Title