Intel® Quartus® Prime Pro Edition User Guide: Design Optimization

ID 683641
Date 8/01/2023

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.6.5. Filtering in the Schematic View

Filtering allows you to filter out nodes and nets in a netlist to view only the logic elements of interest to you.

You can filter a netlist by selecting hierarchy boxes, nodes, or ports of a node, that are part of the path you want to see. The following filter commands are available:

  • Sources—displays the sources of the selection.
  • Destinations—displays the destinations of the selection.
  • Sources & Destinations—displays the sources and destinations of the selection.
  • Selected Nodes—displays only the selected nodes.
  • Between Selected Nodes—displays nodes and connections in the path between the selected nodes.
  • Bus Index—Displays the sources or destinations for one or more indexes of an output or input bus port.
  • Filtering Options—Displays the Filtering Options dialog box:
    • Stop filtering at register—Turning on this option directs the Netlist Viewer to filter out to the nearest register boundary.
    • Filter across hierarchies—Turning on this option directs the Netlist Viewer to filter across hierarchies.
    • Maximum number of hierarchy levels—Sets the maximum number of hierarchy levels that the schematic view can display.

To filter a netlist, select a hierarchy box, node, port, net, or state node, right-click in the window, point to Filter and click the appropriate filter command. The Netlist Viewer generates a new page showing the netlist that remains after filtering.