Quartus® Prime Pro Edition Settings File Reference Manual

Download PDF
ID 683296
Date 4/11/2025
Public
Document Table of Contents
Document Table of Contents x
1. Quartus® Prime Pro Edition Settings File Reference Manual
1. Quartus® Prime Pro Edition Settings File Reference Manual x
1.1. Quartus® Prime Pro Edition Settings File Reference Manual Revision History 1.2. Advanced I/O Timing Assignments 1.3. Analysis & Synthesis Assignments 1.4. Assembler Assignments 1.5. Classic Timing Assignments 1.6. Compiler Assignments 1.7. Design Assistant Assignments 1.8. Design Partition Assignments 1.9. EDA Netlist Writer Assignments 1.10. Equivalence Checker Assignments 1.11. Fitter Assignments 1.12. Netlist Viewer Assignments 1.13. Pin & Location Assignments 1.14. Power Estimation Assignments 1.15. Programmer Assignments 1.16. Project-Wide Assignments 1.17. Retimer Assignments 1.18. Retimer Fast Forward Assignments 1.19. Signal Tap Assignments 1.20. Simulator Assignments
1.2. Advanced I/O Timing Assignments x
1.2.1. BOARD_MODEL_EBD_FAR_END 1.2.2. BOARD_MODEL_EBD_FILE_NAME 1.2.3. BOARD_MODEL_EBD_SIGNAL_NAME 1.2.4. BOARD_MODEL_FAR_C 1.2.5. BOARD_MODEL_FAR_DIFFERENTIAL_R 1.2.6. BOARD_MODEL_FAR_PULLDOWN_R 1.2.7. BOARD_MODEL_FAR_PULLUP_R 1.2.8. BOARD_MODEL_FAR_SERIES_R 1.2.9. BOARD_MODEL_NEAR_C 1.2.10. BOARD_MODEL_NEAR_DIFFERENTIAL_R 1.2.11. BOARD_MODEL_NEAR_PULLDOWN_R 1.2.12. BOARD_MODEL_NEAR_PULLUP_R 1.2.13. BOARD_MODEL_NEAR_SERIES_R 1.2.14. BOARD_MODEL_NEAR_TLINE_C_PER_LENGTH 1.2.15. BOARD_MODEL_NEAR_TLINE_LENGTH 1.2.16. BOARD_MODEL_NEAR_TLINE_L_PER_LENGTH 1.2.17. BOARD_MODEL_TERMINATION_V 1.2.18. BOARD_MODEL_TLINE_C_PER_LENGTH 1.2.19. BOARD_MODEL_TLINE_LENGTH 1.2.20. BOARD_MODEL_TLINE_L_PER_LENGTH 1.2.21. OUTPUT_IO_TIMING_ENDPOINT 1.2.22. OUTPUT_IO_TIMING_FAR_END_VMEAS 1.2.23. OUTPUT_IO_TIMING_NEAR_END_VMEAS
1.3. Analysis & Synthesis Assignments x
1.3.1. ADV_NETLIST_OPT_ALLOWED 1.3.2. ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP 1.3.3. ALLOW_ANY_RAM_SIZE_FOR_RECOGNITION 1.3.4. ALLOW_ANY_ROM_SIZE_FOR_RECOGNITION 1.3.5. ALLOW_ANY_SHIFT_REGISTER_SIZE_FOR_RECOGNITION 1.3.6. ALLOW_CHILD_PARTITIONS 1.3.7. ALLOW_POWER_UP_DONT_CARE 1.3.8. ALLOW_SHIFT_REGISTER_MERGING_ACROSS_HIERARCHIES 1.3.9. ALLOW_SYNCH_CTRL_USAGE 1.3.10. ALTERA_A10_IOPLL_BOOTSTRAP 1.3.11. AUTO_CLOCK_ENABLE_RECOGNITION 1.3.12. AUTO_DSP_RECOGNITION 1.3.13. AUTO_ENABLE_SMART_COMPILE 1.3.14. AUTO_OPEN_DRAIN_PINS 1.3.15. AUTO_PARALLEL_SYNTHESIS 1.3.16. AUTO_RAM_RECOGNITION 1.3.17. AUTO_RESOURCE_SHARING 1.3.18. AUTO_ROM_RECOGNITION 1.3.19. AUTO_SHIFT_REGISTER_RECOGNITION 1.3.20. BLOCK_DESIGN_NAMING 1.3.21. BOARD 1.3.22. DEVICE_FILTER_PACKAGE 1.3.23. DEVICE_FILTER_PIN_COUNT 1.3.24. DEVICE_FILTER_SPEED_GRADE 1.3.25. DEVICE_FILTER_VOLTAGE 1.3.26. DISABLE_DSP_NEGATE_INFERENCING 1.3.27. DISABLE_REGISTER_MERGING_ACROSS_HIERARCHIES 1.3.28. DONT_MERGE_REGISTER 1.3.29. DSE_SYNTH_EXTRA_EFFORT_MODE 1.3.30. DSP_BLOCK_BALANCING 1.3.31. EDA_DESIGN_ENTRY_SYNTHESIS_TOOL 1.3.32. EDA_INPUT_DATA_FORMAT 1.3.33. EDA_INPUT_GND_NAME 1.3.34. EDA_INPUT_VCC_NAME 1.3.35. EDA_LMF_FILE 1.3.36. EDA_RUN_TOOL_AUTOMATICALLY 1.3.37. EDA_SHOW_LMF_MAPPING_MESSAGES 1.3.38. EDA_VHDL_LIBRARY 1.3.39. ENABLE_FORMAL_VERIFICATION 1.3.40. ENABLE_STATE_MACHINE_INFERENCE 1.3.41. FAMILY 1.3.42. FORCE_SYNCH_CLEAR 1.3.43. HDL_INITIAL_FANOUT_LIMIT 1.3.44. HDL_MESSAGE_LEVEL 1.3.45. HDL_MESSAGE_OFF 1.3.46. HDL_MESSAGE_ON 1.3.47. HPS_PARTITION 1.3.48. IGNORE_CARRY_BUFFERS 1.3.49. IGNORE_CASCADE_BUFFERS 1.3.50. IGNORE_GLOBAL_BUFFERS 1.3.51. IGNORE_LCELL_BUFFERS 1.3.52. IGNORE_MAX_FANOUT_ASSIGNMENTS 1.3.53. IGNORE_ROW_GLOBAL_BUFFERS 1.3.54. IGNORE_SOFT_BUFFERS 1.3.55. IGNORE_TRANSLATE_OFF_AND_SYNTHESIS_OFF 1.3.56. IMPLEMENT_AS_CLOCK_ENABLE 1.3.57. IMPLEMENT_AS_OUTPUT_OF_LOGIC_CELL 1.3.58. INFER_RAMS_FROM_RAW_LOGIC 1.3.59. IP_SEARCH_PATHS 1.3.60. MAX_BALANCING_DSP_BLOCKS 1.3.61. MAX_FANOUT 1.3.62. MAX_LABS 1.3.63. MAX_NUMBER_OF_REGISTERS_FROM_UNINFERRED_RAMS 1.3.64. MAX_RAM_BLOCKS_M4K 1.3.65. MLAB_ADD_TIMING_CONSTRAINTS_FOR_MIXED_PORT_FEED_THROUGH_MODE_SETTING_DONT_CARE 1.3.66. MUX_RESTRUCTURE 1.3.67. NOT_GATE_PUSH_BACK 1.3.68. NUMBER_OF_INVERTED_REGISTERS_REPORTED 1.3.69. NUMBER_OF_PROTECTED_REGISTERS_REPORTED 1.3.70. NUMBER_OF_REMOVED_REGISTERS_REPORTED 1.3.71. NUMBER_OF_SWEPT_NODES_REPORTED 1.3.72. OCP_HW_EVAL 1.3.73. OPTIMIZATION_TECHNIQUE 1.3.74. OPTIMIZE_POWER_DURING_SYNTHESIS 1.3.75. PARAMETER 1.3.76. POWER_UP_LEVEL 1.3.77. PRESERVE_FANOUT_FREE_NODE 1.3.78. PRESERVE_REGISTER 1.3.79. PRESERVE_REGISTER_SYN_ONLY 1.3.80. PRPOF_ID 1.3.81. RAMSTYLE_ATTRIBUTE 1.3.82. RBCGEN_CRITICAL_WARNING_TO_ERROR 1.3.83. REMOVE_DUPLICATE_REGISTERS 1.3.84. REMOVE_REDUNDANT_LOGIC_CELLS 1.3.85. REPORT_PARAMETER_SETTINGS_PRO 1.3.86. REPORT_PR_INITIAL_VALUES_AS_ERROR 1.3.87. REPORT_SOURCE_ASSIGNMENTS_PRO 1.3.88. RESYNTHESIS_OPTIMIZATION_EFFORT 1.3.89. RESYNTHESIS_PHYSICAL_SYNTHESIS 1.3.90. RESYNTHESIS_RETIMING 1.3.91. SAFE_STATE_MACHINE 1.3.92. SAVE_DISK_SPACE 1.3.93. SEARCH_PATH 1.3.94. SHIFT_REGISTER_RECOGNITION_ACLR_SIGNAL 1.3.95. SIZE_OF_LATCH_REPORT 1.3.96. SIZE_OF_PR_INITIAL_CONDITIONS_REPORT 1.3.97. SMART_COMPILE_IGNORES_TDC_FOR_STRATIX_PLL_CHANGES 1.3.98. STATE_MACHINE_PROCESSING 1.3.99. STRICT_RAM_RECOGNITION 1.3.100. SYNCHRONIZATION_REGISTER_CHAIN_LENGTH 1.3.101. SYNTHESIS_EFFORT 1.3.102. SYNTHESIS_KEEP_SYNCH_CLEAR_PRESET_BEHAVIOR_IN_UNMAPPER 1.3.103. SYNTHESIS_S10_MIGRATION_CHECKS 1.3.104. SYNTH_CLOCK_MUX_PROTECTION 1.3.105. SYNTH_GATED_CLOCK_CONVERSION 1.3.106. SYNTH_MESSAGE_LEVEL 1.3.107. SYNTH_PROTECT_SDC_CONSTRAINT 1.3.108. SYNTH_RESOURCE_AWARE_INFERENCE_FOR_BLOCK_RAM 1.3.109. SYNTH_TIMING_DRIVEN_SYNTHESIS 1.3.110. TOP_LEVEL_ENTITY 1.3.111. USER_LIBRARIES 1.3.112. USE_GENERATED_PHYSICAL_CONSTRAINTS 1.3.113. VERILOG_CONSTANT_LOOP_LIMIT 1.3.114. VERILOG_INPUT_VERSION 1.3.115. VERILOG_LMF_FILE 1.3.116. VERILOG_MACRO 1.3.117. VERILOG_NON_CONSTANT_LOOP_LIMIT 1.3.118. VERILOG_SHOW_LMF_MAPPING_MESSAGES 1.3.119. VHDL_INPUT_LIBRARY 1.3.120. VHDL_INPUT_VERSION 1.3.121. VHDL_LMF_FILE 1.3.122. VHDL_SHOW_LMF_MAPPING_MESSAGES
1.4. Assembler Assignments x
1.4.1. AUTO_RESTART_CONFIGURATION 1.4.2. CLOCK_SOURCE 1.4.3. COMPRESSION_MODE 1.4.4. CONFIGURATION_CLOCK_DIVISOR 1.4.5. CONFIGURATION_CLOCK_FREQUENCY 1.4.6. DISABLE_REGISTER_POWERUP_INITIALIZATION 1.4.7. ENABLE_ADV_SEU_DETECTION 1.4.8. ENABLE_AUTONOMOUS_PCIE_HIP 1.4.9. ENABLE_OCT_DONE 1.4.10. EPROM_USE_CHECKSUM_AS_USERCODE 1.4.11. GENERATE_HEX_FILE 1.4.12. GENERATE_PMSF_FILES 1.4.13. GENERATE_PR_RBF_FILE 1.4.14. GENERATE_RBF_FILE 1.4.15. GENERATE_TTF_FILE 1.4.16. HEXOUT_FILE_COUNT_DIRECTION 1.4.17. HEXOUT_FILE_START_ADDRESS 1.4.18. HPS_DAP_SPLIT_MODE 1.4.19. HPS_INITIALIZATION 1.4.20. ON_CHIP_BITSTREAM_DECOMPRESSION 1.4.21. PR_BASE_MSF 1.4.22. PR_BASE_SOF 1.4.23. PR_SKIP_BASE_CHECK 1.4.24. PWRMGT_ADV_CLOCK_DATA_FALL_TIME 1.4.25. PWRMGT_ADV_CLOCK_DATA_RISE_TIME 1.4.26. PWRMGT_ADV_DATA_HOLD_TIME 1.4.27. PWRMGT_ADV_DATA_SETUP_TIME 1.4.28. PWRMGT_ADV_FPGA_RELEASE_DELAY 1.4.29. PWRMGT_ADV_INITIAL_DELAY 1.4.30. PWRMGT_ADV_VOLTAGE_STABLE_DELAY 1.4.31. PWRMGT_ADV_VOUT_READING_ERR_MARGIN 1.4.32. PWRMGT_BUS_SPEED_MODE 1.4.33. PWRMGT_DEVICE_ADDRESS_IN_PMBUS_SLAVE_MODE 1.4.34. PWRMGT_DIRECT_FORMAT_COEFFICIENT_B 1.4.35. PWRMGT_DIRECT_FORMAT_COEFFICIENT_M 1.4.36. PWRMGT_DIRECT_FORMAT_COEFFICIENT_R 1.4.37. PWRMGT_LINEAR_FORMAT_N 1.4.38. PWRMGT_PAGE_COMMAND_ENABLE 1.4.39. PWRMGT_SLAVE_DEVICE0_ADDRESS 1.4.40. PWRMGT_SLAVE_DEVICE1_ADDRESS 1.4.41. PWRMGT_SLAVE_DEVICE2_ADDRESS 1.4.42. PWRMGT_SLAVE_DEVICE3_ADDRESS 1.4.43. PWRMGT_SLAVE_DEVICE4_ADDRESS 1.4.44. PWRMGT_SLAVE_DEVICE5_ADDRESS 1.4.45. PWRMGT_SLAVE_DEVICE6_ADDRESS 1.4.46. PWRMGT_SLAVE_DEVICE7_ADDRESS 1.4.47. PWRMGT_SLAVE_DEVICE_TYPE 1.4.48. PWRMGT_TABLE_VERSION 1.4.49. PWRMGT_TRANSLATED_VOLTAGE_VALUE_UNIT 1.4.50. PWRMGT_VOLTAGE_OUTPUT_FORMAT 1.4.51. RELEASE_CLEARS_BEFORE_TRI_STATES 1.4.52. STRATIXII_CONFIGURATION_DEVICE 1.4.53. STRATIX_JTAG_USER_CODE 1.4.54. USE_CHECKERED_PATTERN_AS_UNINITIALIZED_RAM_CONTENT 1.4.55. USE_CHECKSUM_AS_USERCODE 1.4.56. USE_CONFIGURATION_DEVICE
1.5. Classic Timing Assignments x
1.5.1. ANALYZE_LATCHES_AS_SYNCHRONOUS_ELEMENTS 1.5.2. CUT_OFF_IO_PIN_FEEDBACK 1.5.3. CUT_OFF_PATHS_BETWEEN_CLOCK_DOMAINS 1.5.4. CUT_OFF_READ_DURING_WRITE_PATHS 1.5.5. DEFAULT_HOLD_MULTICYCLE 1.5.6. EMIF_SOC_PHYCLK_ADVANCE_MODELING 1.5.7. ENABLE_HPS_INTERNAL_TIMING 1.5.8. FLOW_ENABLE_TIMING_ANALYZER_AFTER_EARLY_PLACE_STAGE 1.5.9. FLOW_ENABLE_TIMING_ANALYZER_AFTER_PLAN_STAGE 1.5.10. IMPLEMENTS_FREE_RUNNING_CLOCK 1.5.11. INPUT_TRANSITION_TIME 1.5.12. MAX_CORE_JUNCTION_TEMP 1.5.13. MIN_CORE_JUNCTION_TEMP 1.5.14. MIN_MTBF_REQUIREMENT 1.5.15. NOMINAL_CORE_SUPPLY_VOLTAGE 1.5.16. PACKAGE_SKEW_COMPENSATION 1.5.17. PLL_EXTERNAL_FEEDBACK_BOARD_DELAY 1.5.18. TDC_AGGRESSIVE_HOLD_CLOSURE_EFFORT 1.5.19. TIMING_ANALYZER_DO_CCPP_REMOVAL 1.5.20. TIMING_ANALYZER_DO_REPORT_TIMING 1.5.21. TIMING_ANALYZER_MULTICORNER_ANALYSIS 1.5.22. TIMING_ANALYZER_REPORT_NUM_WORST_CASE_TIMING_PATHS 1.5.23. TIMING_ANALYZER_REPORT_SCRIPT 1.5.24. TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS 1.5.25. TIMING_ANALYZER_REPORT_WORST_CASE_TIMING_PATHS 1.5.26. TIMING_ANALYZER_SIMULTANEOUS_MULTICORNER_ANALYSIS 1.5.27. USE_DLL_FREQUENCY_FOR_DQS_DELAY_CHAIN
1.6. Compiler Assignments x
1.6.1. ALLOW_REGISTER_DUPLICATION 1.6.2. ALLOW_REGISTER_MERGING 1.6.3. ALLOW_REGISTER_RETIMING 1.6.4. OPTIMIZATION_MODE
1.7. Design Assistant Assignments x
1.7.1. CLK_RULE_CLKNET_CLKSPINES_THRESHOLD 1.7.2. DA_CUSTOM_RULE_FILE 1.7.3. DRC_DEADLOCK_STATE_LIMIT 1.7.4. DRC_DETAIL_MESSAGE_LIMIT 1.7.5. DRC_FANOUT_EXCEEDING 1.7.6. DRC_GATED_CLOCK_FEED 1.7.7. DRC_REPORT_FANOUT_EXCEEDING 1.7.8. DRC_REPORT_TOP_FANOUT 1.7.9. DRC_TOP_FANOUT 1.7.10. DRC_VIOLATION_MESSAGE_LIMIT 1.7.11. ENABLE_DRC_SETTINGS 1.7.12. HARDCOPY_FLOW_AUTOMATION 1.7.13. HARDCOPY_NEW_PROJECT_PATH 1.7.14. HCPY_CAT 1.7.15. HCPY_PLL_MULTIPLE_CLK_NETWORK_TYPES 1.7.16. HCPY_VREF_PINS
1.8. Design Partition Assignments x
1.8.1. ABSORB_PATHS_FROM_OUTPUTS_TO_INPUTS 1.8.2. AUTOMATIC_DANGLING_PORT_TIEOFF 1.8.3. CROSS_BOUNDARY_OPTIMIZATIONS 1.8.4. EMPTY 1.8.5. ENABLE_LAB_SHARING_WITH_PARENT_PARTITION 1.8.6. ENABLE_STRICT_PRESERVATION 1.8.7. ENTITY_REBINDING 1.8.8. EXPORT_BLOCK_NAME_OBFUSCATION 1.8.9. IGNORE_PARTITIONS 1.8.10. INCREMENTAL_COMPILATION_EXPORT_FLATTEN 1.8.11. INCREMENTAL_COMPILATION_EXPORT_POST_FIT 1.8.12. INCREMENTAL_COMPILATION_EXPORT_POST_SYNTH 1.8.13. INSERT_BOUNDARY_WIRE_LUTS 1.8.14. MERGE_EQUIVALENT_BIDIRS 1.8.15. MERGE_EQUIVALENT_INPUTS 1.8.16. PARTIAL_RECONFIGURATION_PARTITION 1.8.17. PARTITION 1.8.18. PARTITION_ALWAYS_USE_QXP_NETLIST 1.8.19. PARTITION_ASD_REGION 1.8.20. PARTITION_ASD_REGION_ID 1.8.21. PARTITION_ENABLE_STRICT_PRESERVATION 1.8.22. PARTITION_IGNORE_SOURCE_FILE_CHANGES 1.8.23. PARTITION_PRESERVE_HIGH_SPEED_TILES 1.8.24. PERIPHERY_REUSE_CORE 1.8.25. PRESERVE 1.8.26. PROPAGATE_CONSTANTS_ON_INPUTS 1.8.27. PROPAGATE_INVERSIONS_ON_INPUTS 1.8.28. QDB_FILE_PARTITION 1.8.29. QDB_PATH 1.8.30. REMOVE_LOGIC_ON_UNCONNECTED_OUTPUTS
1.9. EDA Netlist Writer Assignments x
1.9.1. EDA_BOARD_BOUNDARY_SCAN_OPERATION 1.9.2. EDA_BOARD_DESIGN_BOUNDARY_SCAN_TOOL 1.9.3. EDA_BOARD_DESIGN_SIGNAL_INTEGRITY_TOOL 1.9.4. EDA_BOARD_DESIGN_SYMBOL_TOOL 1.9.5. EDA_BOARD_DESIGN_TIMING_TOOL 1.9.6. EDA_BOARD_DESIGN_TOOL 1.9.7. EDA_DESIGN_EXTRA_ALTERA_SIM_LIB 1.9.8. EDA_DESIGN_INSTANCE_NAME 1.9.9. EDA_ENABLE_GLITCH_FILTERING 1.9.10. EDA_ENABLE_IPUTF_MODE 1.9.11. EDA_EXTRA_ELAB_OPTION 1.9.12. EDA_FLATTEN_BUSES 1.9.13. EDA_FORMAL_VERIFICATION_ALLOW_RETIMING 1.9.14. EDA_FORMAL_VERIFICATION_TOOL 1.9.15. EDA_FV_HIERARCHY 1.9.16. EDA_GENERATE_GATE_LEVEL_SIMULATION_COMMAND_SCRIPT 1.9.17. EDA_GENERATE_POWER_INPUT_FILE 1.9.18. EDA_GENERATE_RTL_SIMULATION_COMMAND_SCRIPT 1.9.19. EDA_GENERATE_TIMING_CLOSURE_DATA 1.9.20. EDA_IBIS_EXTENDED_MODEL_SELECTOR 1.9.21. EDA_IBIS_MODEL_SELECTOR 1.9.22. EDA_IBIS_MUTUAL_COUPLING 1.9.23. EDA_IBIS_SPECIFICATION_VERSION 1.9.24. EDA_IPFS_FILE 1.9.25. EDA_LAUNCH_CMD_LINE_TOOL 1.9.26. EDA_MAP_ILLEGAL_CHARACTERS 1.9.27. EDA_NATIVELINK_GENERATE_SCRIPT_ONLY 1.9.28. EDA_NATIVELINK_PORTABLE_FILE_PATHS 1.9.29. EDA_NATIVELINK_SIMULATION_SETUP_SCRIPT 1.9.30. EDA_NATIVELINK_SIMULATION_TEST_BENCH 1.9.31. EDA_NETLIST_WRITER_OUTPUT_DIR 1.9.32. EDA_RESYNTHESIS_TOOL 1.9.33. EDA_RTL_SIMULATION_RUN_SCRIPT 1.9.34. EDA_RTL_SIM_MODE 1.9.35. EDA_RTL_TEST_BENCH_FILE_NAME 1.9.36. EDA_RTL_TEST_BENCH_NAME 1.9.37. EDA_RTL_TEST_BENCH_RUN_FOR 1.9.38. EDA_SDC_FILE_NAME 1.9.39. EDA_SIMULATION_RUN_SCRIPT 1.9.40. EDA_SIMULATION_TOOL 1.9.41. EDA_TEST_BENCH_DESIGN_INSTANCE_NAME 1.9.42. EDA_TEST_BENCH_ENABLE_STATUS 1.9.43. EDA_TEST_BENCH_ENTITY_MODULE_NAME 1.9.44. EDA_TEST_BENCH_EXTRA_ALTERA_SIM_LIB 1.9.45. EDA_TEST_BENCH_FILE 1.9.46. EDA_TEST_BENCH_FILE_NAME 1.9.47. EDA_TEST_BENCH_GATE_LEVEL_NETLIST_LIBRARY 1.9.48. EDA_TEST_BENCH_MODULE_NAME 1.9.49. EDA_TEST_BENCH_NAME 1.9.50. EDA_TEST_BENCH_RUN_FOR 1.9.51. EDA_TEST_BENCH_RUN_SIM_FOR 1.9.52. EDA_TIME_SCALE 1.9.53. EDA_TIMING_ANALYSIS_TOOL 1.9.54. EDA_TRUNCATE_LONG_HIERARCHY_PATHS 1.9.55. EDA_USER_COMPILED_SIMULATION_LIBRARY_DIRECTORY 1.9.56. EDA_VHDL_ARCH_NAME 1.9.57. EDA_WAIT_FOR_GUI_TOOL_COMPLETION 1.9.58. EDA_WRITER_DONT_WRITE_TOP_ENTITY 1.9.59. EDA_WRITE_DEVICE_CONTROL_PORTS 1.9.60. EDA_WRITE_NODES_FOR_POWER_ESTIMATION
1.10. Equivalence Checker Assignments x
1.10.1. EQC_AUTO_BREAK_CONE 1.10.2. EQC_AUTO_COMP_LOOP_CUT 1.10.3. EQC_AUTO_INVERSION 1.10.4. EQC_AUTO_PORTSWAP 1.10.5. EQC_AUTO_TERMINATE 1.10.6. EQC_BBOX_MERGE 1.10.7. EQC_CONSTANT_DFF_DETECTION 1.10.8. EQC_DETECT_DONT_CARES 1.10.9. EQC_DFF_SS_EMULATION 1.10.10. EQC_DUPLICATE_DFF_DETECTION 1.10.11. EQC_LVDS_MERGE 1.10.12. EQC_MAC_REGISTER_UNPACK 1.10.13. EQC_PARAMETER_CHECK 1.10.14. EQC_POWER_UP_COMPARE 1.10.15. EQC_RAM_REGISTER_UNPACK 1.10.16. EQC_RAM_UNMERGING 1.10.17. EQC_RENAMING_RULES 1.10.18. EQC_RENAMING_RULES_LIST 1.10.19. EQC_SET_PARTITION_BB_TO_VCC_GND 1.10.20. EQC_SHOW_ALL_MAPPED_POINTS 1.10.21. EQC_STRUCTURE_MATCHING 1.10.22. EQC_SUB_CONE_REPORT
1.11. Fitter Assignments x
1.11.1. ACTIVE_SERIAL_CLOCK 1.11.2. ALLOW_ROUTING_TO_PERIPHERY_THROUGH_GLOBAL_NETWORK 1.11.3. ALLOW_SEU_FAULT_INJECTION 1.11.4. ALM_REGISTER_PACKING_EFFORT 1.11.5. AUTO_DELAY_CHAINS 1.11.6. AUTO_DELAY_CHAINS_FOR_HIGH_FANOUT_INPUT_PINS 1.11.7. AUTO_GLOBAL_CLOCK 1.11.8. AUTO_GLOBAL_REGISTER_CONTROLS 1.11.9. AUTO_RESERVE_CLKUSR_FOR_CALIBRATION 1.11.10. BASE_PIN_OUT_FILE_ON_SAMEFRAME_DEVICE 1.11.11. BLOCK_RAM_AND_MLAB_EQUIVALENT_PAUSED_READ_CAPABILITIES 1.11.12. BLOCK_RAM_AND_MLAB_EQUIVALENT_POWER_UP_CONDITIONS 1.11.13. BLOCK_RAM_TO_MLAB_CELL_CONVERSION 1.11.14. CDR_BANDWIDTH_PRESET 1.11.15. CKN_CK_PAIR 1.11.16. CLOCK_REGION 1.11.17. CONFIGURATION_VCCIO_LEVEL 1.11.18. CONVERT_PR_WARNINGS_TO_ERRORS 1.11.19. CRC_ERROR_OPEN_DRAIN 1.11.20. CURRENT_STRENGTH_NEW 1.11.21. CVP_CONFDONE_OPEN_DRAIN 1.11.22. CVP_MODE 1.11.23. DEVICE 1.11.24. DEVICE_INITIALIZATION_CLOCK 1.11.25. DEVICE_MIGRATION_LIST 1.11.26. DEVICE_TECHNOLOGY_MIGRATION_LIST 1.11.27. DQ_GROUP 1.11.28. DSP_REGISTER_PACKING 1.11.29. DUPLICATE_ATOM 1.11.30. ECO_OPTIMIZE_TIMING 1.11.31. ECO_REGENERATE_REPORT 1.11.32. ENABLE_BUS_HOLD_CIRCUITRY 1.11.33. ENABLE_CRC_ERROR_PIN 1.11.34. ENABLE_CVP_CONFDONE 1.11.35. ENABLE_DEVICE_WIDE_OE 1.11.36. ENABLE_DEVICE_WIDE_RESET 1.11.37. ENABLE_ED_CRC_CHECK 1.11.38. ENABLE_INIT_DONE_OUTPUT 1.11.39. ENABLE_NCEO_OUTPUT 1.11.40. ENABLE_PR_PINS 1.11.41. ENABLE_UNUSED_RX_CLOCK_WORKAROUND 1.11.42. ERROR_CHECK_FREQUENCY_DIVISOR 1.11.43. EXCLUSIVE_IO_GROUP 1.11.44. FINAL_PLACEMENT_OPTIMIZATION 1.11.45. FITTER_AGGRESSIVE_ROUTABILITY_OPTIMIZATION 1.11.46. FITTER_AUTO_EFFORT_DESIRED_SLACK_MARGIN 1.11.47. FITTER_EFFORT 1.11.48. FLEX10K_MAX_PERIPHERAL_OE 1.11.49. FLOW_ENABLE_EARLY_PLACE 1.11.50. FORCE_CONFIGURATION_VCCIO 1.11.51. GLOBAL_SIGNAL 1.11.52. GNDIO_CURRENT_1PT8V 1.11.53. GNDIO_CURRENT_2PT5V 1.11.54. GNDIO_CURRENT_GTL 1.11.55. GNDIO_CURRENT_GTL_PLUS 1.11.56. GNDIO_CURRENT_LVCMOS 1.11.57. GNDIO_CURRENT_LVTTL 1.11.58. GNDIO_CURRENT_PCI 1.11.59. GNDIO_CURRENT_SSTL2_CLASS1 1.11.60. GNDIO_CURRENT_SSTL2_CLASS2 1.11.61. GNDIO_CURRENT_SSTL3_CLASS1 1.11.62. GNDIO_CURRENT_SSTL3_CLASS2 1.11.63. GXB_0PPM_CORECLK 1.11.64. HPS_COLD_RESET_PIN_MODE 1.11.65. HPS_WARM_RESET_PIN_MODE 1.11.66. HSSI_PARAMETER 1.11.67. IGNORE_HSSI_COLUMN_POWER_WHEN_PRESERVING_UNUSED_XCVR_CHANNELS 1.11.68. INIT_DONE_OPEN_DRAIN 1.11.69. INPUT_DELAY_CHAIN 1.11.70. INPUT_TERMINATION 1.11.71. INTERNAL_SCRUBBING 1.11.72. IO_12_LANE_INPUT_DATA_DELAY_CHAIN 1.11.73. IO_12_LANE_INPUT_STROBE_DELAY_CHAIN 1.11.74. IO_MAXIMUM_TOGGLE_RATE 1.11.75. IO_PARTITION_PLACEMENT 1.11.76. IO_STANDARD 1.11.77. LVDS_DIRECT_LOOPBACK_MODE 1.11.78. MACRO_HEAD 1.11.79. MACRO_MEMBER 1.11.80. MATCH_PLL_COMPENSATION_CLOCK 1.11.81. MIGRATION_DEVICES 1.11.82. MINIMUM_SEU_INTERVAL 1.11.83. MODULE_BLOATING_FACTOR 1.11.84. NCEO_OPEN_DRAIN 1.11.85. NUMBER_OF_EXAMPLE_NODES_REPORTED 1.11.86. OE_DELAY_CHAIN 1.11.87. OPTIMIZE_FOR_METASTABILITY 1.11.88. OPTIMIZE_HOLD_TIMING 1.11.89. OPTIMIZE_IOC_REGISTER_PLACEMENT_FOR_TIMING 1.11.90. OPTIMIZE_MULTI_CORNER_TIMING 1.11.91. OPTIMIZE_PERSONA_ROUTABILITY 1.11.92. OPTIMIZE_POWER_DURING_FITTING 1.11.93. OPTIMIZE_TIMING 1.11.94. OUTPUT_DELAY_CHAIN 1.11.95. OUTPUT_TERMINATION 1.11.96. PERIPHERY_TO_CORE_PLACEMENT_AND_ROUTING_OPTIMIZATION 1.11.97. PERIPH_FITTER_SCRIPT 1.11.98. PERIPH_REPORT_SCRIPT 1.11.99. PHYSICAL_SYNTHESIS 1.11.100. PLACEMENT_EFFORT_MULTIPLIER 1.11.101. PLL_AUTO_RESET 1.11.102. PLL_BANDWIDTH_PRESET 1.11.103. PLL_COMPENSATION_MODE 1.11.104. PLL_OPTIMIZE_PHASE_SHIFT_FOR_TIMING 1.11.105. PRESERVE_UNUSED_XCVR_CHANNEL 1.11.106. PROGRAMMABLE_POWER_MAXIMUM_HIGH_SPEED_FRACTION_OF_USED_LAB_TILES 1.11.107. PROGRAMMABLE_POWER_TECHNOLOGY_SETTING 1.11.108. PROGRAMMABLE_PREEMPHASIS 1.11.109. PROGRAMMABLE_VOD 1.11.110. PR_DONE_OPEN_DRAIN 1.11.111. PR_ERROR_OPEN_DRAIN 1.11.112. PR_PINS_OPEN_DRAIN 1.11.113. PR_READY_OPEN_DRAIN 1.11.114. QII_AUTO_PACKED_REGISTERS 1.11.115. RELATIVE_NEUTRON_FLUX 1.11.116. RESERVE_ALL_UNUSED_PINS_WEAK_PULLUP 1.11.117. RESERVE_AVST_CLK_AFTER_CONFIGURATION 1.11.118. RESERVE_AVST_DATA15_THROUGH_DATA0_AFTER_CONFIGURATION 1.11.119. RESERVE_AVST_DATA31_THROUGH_DATA16_AFTER_CONFIGURATION 1.11.120. RESERVE_AVST_VALID_AFTER_CONFIGURATION 1.11.121. RESERVE_DATA0_AFTER_CONFIGURATION 1.11.122. RESERVE_DATA15_THROUGH_DATA8_AFTER_CONFIGURATION 1.11.123. RESERVE_DATA31_THROUGH_DATA16_AFTER_CONFIGURATION 1.11.124. RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION 1.11.125. RESERVE_FLEXIBLE_CLOCK_NETWORK 1.11.126. RESERVE_PR_PINS 1.11.127. RESERVE_ROUTING_OUTPUT_FLEXIBILITY 1.11.128. ROUTER_CLOCKING_TOPOLOGY_ANALYSIS 1.11.129. ROUTER_EFFORT_MULTIPLIER 1.11.130. ROUTER_LCELL_INSERTION_AND_LOGIC_DUPLICATION 1.11.131. ROUTER_REGISTER_DUPLICATION 1.11.132. ROUTER_TIMING_OPTIMIZATION_LEVEL 1.11.133. RZQ_GROUP 1.11.134. SDM_DIRECT_TO_FACTORY_IMAGE 1.11.135. SDM_PCIE_CALIB_START 1.11.136. SEED 1.11.137. SEU_FIT_REPORT 1.11.138. SLEW_RATE 1.11.139. SLOW_SLEW_RATE 1.11.140. STRATIXV_CONFIGURATION_SCHEME 1.11.141. STRATIX_DEVICE_IO_STANDARD 1.11.142. SYNCHRONIZER_IDENTIFICATION 1.11.143. SYNCHRONIZER_TOGGLE_RATE 1.11.144. TERMINATION_CONTROL_BLOCK 1.11.145. TREAT_BIDIR_AS_OUTPUT 1.11.146. TRI_STATE_SPI_PINS 1.11.147. UNFORCE_MERGE_PLL 1.11.148. UNUSED_TSD_PINS_GND 1.11.149. USE_AS_3V_GPIO 1.11.150. USE_CONF_DONE 1.11.151. USE_CVP_CONFDONE 1.11.152. USE_HPS_COLD_RESET 1.11.153. USE_HPS_WARM_RESET 1.11.154. USE_INIT_DONE 1.11.155. USE_PWRMGT_ALERT 1.11.156. USE_PWRMGT_PWM0 1.11.157. USE_PWRMGT_SCL 1.11.158. USE_PWRMGT_SDA 1.11.159. USE_SEU_ERROR 1.11.160. USE_UIB_CATTRIP 1.11.161. VCCIO_CURRENT_1PT8V 1.11.162. VCCIO_CURRENT_2PT5V 1.11.163. VCCIO_CURRENT_GTL 1.11.164. VCCIO_CURRENT_GTL_PLUS 1.11.165. VCCIO_CURRENT_LVCMOS 1.11.166. VCCIO_CURRENT_LVTTL 1.11.167. VCCIO_CURRENT_PCI 1.11.168. VCCIO_CURRENT_SSTL2_CLASS1 1.11.169. VCCIO_CURRENT_SSTL2_CLASS2 1.11.170. VCCIO_CURRENT_SSTL3_CLASS1 1.11.171. VCCIO_CURRENT_SSTL3_CLASS2 1.11.172. VID_OPERATION_MODE 1.11.173. VREF_MODE 1.11.174. WEAK_PULL_UP_RESISTOR 1.11.175. XCVR_A10_REFCLK_TERM_TRISTATE 1.11.176. XCVR_A10_RX_ADP_CTLE_ACGAIN_4S 1.11.177. XCVR_A10_RX_ADP_CTLE_EQZ_1S_SEL 1.11.178. XCVR_A10_RX_ADP_DFE_FXTAP1 1.11.179. XCVR_A10_RX_ADP_DFE_FXTAP10 1.11.180. XCVR_A10_RX_ADP_DFE_FXTAP10_SGN 1.11.181. XCVR_A10_RX_ADP_DFE_FXTAP11 1.11.182. XCVR_A10_RX_ADP_DFE_FXTAP11_SGN 1.11.183. XCVR_A10_RX_ADP_DFE_FXTAP2 1.11.184. XCVR_A10_RX_ADP_DFE_FXTAP2_SGN 1.11.185. XCVR_A10_RX_ADP_DFE_FXTAP3 1.11.186. XCVR_A10_RX_ADP_DFE_FXTAP3_SGN 1.11.187. XCVR_A10_RX_ADP_DFE_FXTAP4 1.11.188. XCVR_A10_RX_ADP_DFE_FXTAP4_SGN 1.11.189. XCVR_A10_RX_ADP_DFE_FXTAP5 1.11.190. XCVR_A10_RX_ADP_DFE_FXTAP5_SGN 1.11.191. XCVR_A10_RX_ADP_DFE_FXTAP6 1.11.192. XCVR_A10_RX_ADP_DFE_FXTAP6_SGN 1.11.193. XCVR_A10_RX_ADP_DFE_FXTAP7 1.11.194. XCVR_A10_RX_ADP_DFE_FXTAP7_SGN 1.11.195. XCVR_A10_RX_ADP_DFE_FXTAP8 1.11.196. XCVR_A10_RX_ADP_DFE_FXTAP8_SGN 1.11.197. XCVR_A10_RX_ADP_DFE_FXTAP9 1.11.198. XCVR_A10_RX_ADP_DFE_FXTAP9_SGN 1.11.199. XCVR_A10_RX_ADP_VGA_SEL 1.11.200. XCVR_A10_RX_EQ_BW_SEL 1.11.201. XCVR_A10_RX_EQ_DC_GAIN_TRIM 1.11.202. XCVR_A10_RX_LINK 1.11.203. XCVR_A10_RX_ONE_STAGE_ENABLE 1.11.204. XCVR_A10_RX_TERM_SEL 1.11.205. XCVR_A10_TX_COMPENSATION_EN 1.11.206. XCVR_A10_TX_LINK 1.11.207. XCVR_A10_TX_PRE_EMP_SIGN_1ST_POST_TAP 1.11.208. XCVR_A10_TX_PRE_EMP_SIGN_2ND_POST_TAP 1.11.209. XCVR_A10_TX_PRE_EMP_SIGN_PRE_TAP_1T 1.11.210. XCVR_A10_TX_PRE_EMP_SIGN_PRE_TAP_2T 1.11.211. XCVR_A10_TX_PRE_EMP_SWITCHING_CTRL_1ST_POST_TAP 1.11.212. XCVR_A10_TX_PRE_EMP_SWITCHING_CTRL_2ND_POST_TAP 1.11.213. XCVR_A10_TX_PRE_EMP_SWITCHING_CTRL_PRE_TAP_1T 1.11.214. XCVR_A10_TX_PRE_EMP_SWITCHING_CTRL_PRE_TAP_2T 1.11.215. XCVR_A10_TX_SLEW_RATE_CTRL 1.11.216. XCVR_A10_TX_TERM_SEL 1.11.217. XCVR_A10_TX_VOD_OUTPUT_SWING_CTRL 1.11.218. XCVR_A10_TX_XTX_PATH_ANALOG_MODE 1.11.219. XCVR_C10_REFCLK_TERM_TRISTATE 1.11.220. XCVR_C10_RX_ADP_CTLE_ACGAIN_4S 1.11.221. XCVR_C10_RX_ADP_CTLE_EQZ_1S_SEL 1.11.222. XCVR_C10_RX_ADP_DFE_FXTAP1 1.11.223. XCVR_C10_RX_ADP_DFE_FXTAP10 1.11.224. XCVR_C10_RX_ADP_DFE_FXTAP10_SGN 1.11.225. XCVR_C10_RX_ADP_DFE_FXTAP11 1.11.226. XCVR_C10_RX_ADP_DFE_FXTAP11_SGN 1.11.227. XCVR_C10_RX_ADP_DFE_FXTAP2 1.11.228. XCVR_C10_RX_ADP_DFE_FXTAP2_SGN 1.11.229. XCVR_C10_RX_ADP_DFE_FXTAP3 1.11.230. XCVR_C10_RX_ADP_DFE_FXTAP3_SGN 1.11.231. XCVR_C10_RX_ADP_DFE_FXTAP4 1.11.232. XCVR_C10_RX_ADP_DFE_FXTAP4_SGN 1.11.233. XCVR_C10_RX_ADP_DFE_FXTAP5 1.11.234. XCVR_C10_RX_ADP_DFE_FXTAP5_SGN 1.11.235. XCVR_C10_RX_ADP_DFE_FXTAP6 1.11.236. XCVR_C10_RX_ADP_DFE_FXTAP6_SGN 1.11.237. XCVR_C10_RX_ADP_DFE_FXTAP7 1.11.238. XCVR_C10_RX_ADP_DFE_FXTAP7_SGN 1.11.239. XCVR_C10_RX_ADP_DFE_FXTAP8 1.11.240. XCVR_C10_RX_ADP_DFE_FXTAP8_SGN 1.11.241. XCVR_C10_RX_ADP_DFE_FXTAP9 1.11.242. XCVR_C10_RX_ADP_DFE_FXTAP9_SGN 1.11.243. XCVR_C10_RX_ADP_VGA_SEL 1.11.244. XCVR_C10_RX_EQ_BW_SEL 1.11.245. XCVR_C10_RX_EQ_DC_GAIN_TRIM 1.11.246. XCVR_C10_RX_LINK 1.11.247. XCVR_C10_RX_ONE_STAGE_ENABLE 1.11.248. XCVR_C10_RX_TERM_SEL 1.11.249. XCVR_C10_TX_COMPENSATION_EN 1.11.250. XCVR_C10_TX_LINK 1.11.251. XCVR_C10_TX_PRE_EMP_SIGN_1ST_POST_TAP 1.11.252. XCVR_C10_TX_PRE_EMP_SIGN_2ND_POST_TAP 1.11.253. XCVR_C10_TX_PRE_EMP_SIGN_PRE_TAP_1T 1.11.254. XCVR_C10_TX_PRE_EMP_SIGN_PRE_TAP_2T 1.11.255. XCVR_C10_TX_PRE_EMP_SWITCHING_CTRL_1ST_POST_TAP 1.11.256. XCVR_C10_TX_PRE_EMP_SWITCHING_CTRL_2ND_POST_TAP 1.11.257. XCVR_C10_TX_PRE_EMP_SWITCHING_CTRL_PRE_TAP_1T 1.11.258. XCVR_C10_TX_PRE_EMP_SWITCHING_CTRL_PRE_TAP_2T 1.11.259. XCVR_C10_TX_SLEW_RATE_CTRL 1.11.260. XCVR_C10_TX_TERM_SEL 1.11.261. XCVR_C10_TX_VOD_OUTPUT_SWING_CTRL 1.11.262. XCVR_C10_TX_XTX_PATH_ANALOG_MODE 1.11.263. XCVR_RECONFIG_GROUP 1.11.264. XCVR_S10_REFCLK_TERM_TRISTATE 1.11.265. XCVR_USE_HQ_REFCLK 1.11.266. XCVR_USE_SKEW_BALANCED 1.11.267. XCVR_VCCR_VCCT_VOLTAGE
1.12. Netlist Viewer Assignments x
1.12.1. RTLV_GROUP_COMB_LOGIC_IN_CLOUD 1.12.2. RTLV_GROUP_COMB_LOGIC_IN_CLOUD_TMV 1.12.3. RTLV_GROUP_RELATED_NODES 1.12.4. RTLV_GROUP_RELATED_NODES_TMV 1.12.5. RTLV_REMOVE_FANOUT_FREE_REGISTERS 1.12.6. RTLV_SIMPLIFIED_LOGIC
1.13. Pin & Location Assignments x
1.13.1. FAST_INPUT_REGISTER 1.13.2. FAST_OUTPUT_ENABLE_REGISTER 1.13.3. FAST_OUTPUT_REGISTER 1.13.4. IP_DEBUG_VISIBLE 1.13.5. LOCATION 1.13.6. PIN_CONNECT_FROM_NODE 1.13.7. RESERVE_PIN 1.13.8. SUBCLIQUE_OF 1.13.9. VIRTUAL_PIN
1.14. Power Estimation Assignments x
1.14.1. ENABLE_SMART_VOLTAGE_ID 1.14.2. POWER_APPLY_THERMAL_MARGIN 1.14.3. POWER_AUTO_COMPUTE_TJ 1.14.4. POWER_BOARD_TEMPERATURE 1.14.5. POWER_BOARD_THERMAL_MODEL 1.14.6. POWER_COOLING_FOR_MAX_TJ 1.14.7. POWER_DEFAULT_INPUT_IO_TOGGLE_RATE 1.14.8. POWER_DEFAULT_TOGGLE_RATE 1.14.9. POWER_GLITCH_FACTOR 1.14.10. POWER_HPS_DYNAMIC_POWER_DUAL 1.14.11. POWER_HPS_DYNAMIC_POWER_SINGLE 1.14.12. POWER_HPS_ENABLE 1.14.13. POWER_HPS_JUNCTION_TEMPERATURE 1.14.14. POWER_HPS_PROC_FREQ 1.14.15. POWER_HPS_STATIC_POWER 1.14.16. POWER_HPS_TOTAL_POWER 1.14.17. POWER_HSSI 1.14.18. POWER_HSSI_LEFT 1.14.19. POWER_HSSI_RIGHT 1.14.20. POWER_HSSI_VCCHIP_LEFT 1.14.21. POWER_HSSI_VCCHIP_RIGHT 1.14.22. POWER_INPUT_FILE_NAME 1.14.23. POWER_INPUT_FILE_TYPE 1.14.24. POWER_MAX_TJ_VALUE 1.14.25. POWER_OCS_VALUE 1.14.26. POWER_OJB_VALUE 1.14.27. POWER_OJC_VALUE 1.14.28. POWER_OSA_VALUE 1.14.29. POWER_OUTPUT_SAF_NAME 1.14.30. POWER_PRESET_COOLING_SOLUTION 1.14.31. POWER_READ_INPUT_FILE 1.14.32. POWER_REPORT_POWER_DISSIPATION 1.14.33. POWER_REPORT_SIGNAL_ACTIVITY 1.14.34. POWER_STATIC_PROBABILITY 1.14.35. POWER_TJ_VALUE 1.14.36. POWER_TOGGLE_RATE 1.14.37. POWER_TOGGLE_RATE_PERCENTAGE 1.14.38. POWER_USE_CUSTOM_COOLING_SOLUTION 1.14.39. POWER_USE_DEVICE_CHARACTERISTICS 1.14.40. POWER_USE_INPUT_FILES 1.14.41. POWER_USE_PVA 1.14.42. POWER_USE_TA_VALUE 1.14.43. POWER_VCCAUX_USER_OPTION 1.14.44. POWER_VCCA_GXBL_USER_OPTION 1.14.45. POWER_VCCA_GXBR_USER_OPTION 1.14.46. POWER_VCCA_GXB_USER_OPTION 1.14.47. POWER_VCCA_L_USER_OPTION 1.14.48. POWER_VCCA_R_USER_OPTION 1.14.49. POWER_VCCCB_USER_OPTION 1.14.50. POWER_VCCH_GXBL_USER_OPTION 1.14.51. POWER_VCCH_GXBR_USER_OPTION 1.14.52. POWER_VCCH_GXB_USER_OPTION 1.14.53. POWER_VCCIO_USER_OPTION 1.14.54. POWER_VCCL_GXB_USER_OPTION 1.14.55. POWER_VCCPD_USER_OPTION 1.14.56. POWER_VCCR_GXBL_USER_OPTION 1.14.57. POWER_VCCR_GXBR_USER_OPTION 1.14.58. POWER_VCCR_GXB_USER_OPTION 1.14.59. POWER_VCCT_GXBL_USER_OPTION 1.14.60. POWER_VCCT_GXBR_USER_OPTION 1.14.61. POWER_VCCT_GXB_USER_OPTION 1.14.62. POWER_VCD_FILE_END_TIME 1.14.63. POWER_VCD_FILE_START_TIME 1.14.64. POWER_VCD_FILTER_GLITCHES 1.14.65. VCCAUX_SHARED_USER_VOLTAGE 1.14.66. VCCAUX_USER_VOLTAGE 1.14.67. VCCA_FPLL_USER_VOLTAGE 1.14.68. VCCA_GTBR_USER_VOLTAGE 1.14.69. VCCA_GTB_USER_VOLTAGE 1.14.70. VCCA_GXBL_USER_VOLTAGE 1.14.71. VCCA_GXBR_USER_VOLTAGE 1.14.72. VCCA_GXB_USER_VOLTAGE 1.14.73. VCCA_L_USER_VOLTAGE 1.14.74. VCCA_PLL_USER_VOLTAGE 1.14.75. VCCA_R_USER_VOLTAGE 1.14.76. VCCA_USER_VOLTAGE 1.14.77. VCCBAT_USER_VOLTAGE 1.14.78. VCCCB_USER_VOLTAGE 1.14.79. VCCD_FPLL_USER_VOLTAGE 1.14.80. VCCD_PLL_USER_VOLTAGE 1.14.81. VCCD_USER_VOLTAGE 1.14.82. VCCEH_GXBL_USER_VOLTAGE 1.14.83. VCCEH_GXBR_USER_VOLTAGE 1.14.84. VCCEH_GXB_USER_VOLTAGE 1.14.85. VCCERAM_USER_VOLTAGE 1.14.86. VCCE_GXBL_USER_VOLTAGE 1.14.87. VCCE_GXBR_USER_VOLTAGE 1.14.88. VCCE_GXB_USER_VOLTAGE 1.14.89. VCCE_USER_VOLTAGE 1.14.90. VCCHIP_L_USER_VOLTAGE 1.14.91. VCCHIP_R_USER_VOLTAGE 1.14.92. VCCHIP_USER_VOLTAGE 1.14.93. VCCHSSI_L_USER_VOLTAGE 1.14.94. VCCHSSI_R_USER_VOLTAGE 1.14.95. VCCH_GTBR_USER_VOLTAGE 1.14.96. VCCH_GTB_USER_VOLTAGE 1.14.97. VCCH_GXBL_USER_VOLTAGE 1.14.98. VCCH_GXBR_USER_VOLTAGE 1.14.99. VCCH_GXB_USER_VOLTAGE 1.14.100. VCCH_L_USER_VOLTAGE 1.14.101. VCCH_R_USER_VOLTAGE 1.14.102. VCCINT_USER_VOLTAGE 1.14.103. VCCIOREF_HPS_USER_VOLTAGE 1.14.104. VCCIO_HPS_USER_VOLTAGE 1.14.105. VCCIO_USER_VOLTAGE 1.14.106. VCCL_GTBL_USER_VOLTAGE 1.14.107. VCCL_GTBR_USER_VOLTAGE 1.14.108. VCCL_GTB_USER_VOLTAGE 1.14.109. VCCL_GXBL_USER_VOLTAGE 1.14.110. VCCL_GXBR_USER_VOLTAGE 1.14.111. VCCL_GXB_USER_VOLTAGE 1.14.112. VCCL_HPS_USER_VOLTAGE 1.14.113. VCCL_USER_VOLTAGE 1.14.114. VCCPD_USER_VOLTAGE 1.14.115. VCCPGM_USER_VOLTAGE 1.14.116. VCCPLL_HPS_USER_VOLTAGE 1.14.117. VCCPT_USER_VOLTAGE 1.14.118. VCCP_USER_VOLTAGE 1.14.119. VCCRSTCLK_HPS_USER_VOLTAGE 1.14.120. VCCR_GTBL_USER_VOLTAGE 1.14.121. VCCR_GTBR_USER_VOLTAGE 1.14.122. VCCR_GTB_USER_VOLTAGE 1.14.123. VCCR_GXBL_USER_VOLTAGE 1.14.124. VCCR_GXBR_USER_VOLTAGE 1.14.125. VCCR_GXB_USER_VOLTAGE 1.14.126. VCCR_L_USER_VOLTAGE 1.14.127. VCCR_R_USER_VOLTAGE 1.14.128. VCCR_USER_VOLTAGE 1.14.129. VCCT_GTBL_USER_VOLTAGE 1.14.130. VCCT_GTBR_USER_VOLTAGE 1.14.131. VCCT_GTB_USER_VOLTAGE 1.14.132. VCCT_GXBL_USER_VOLTAGE 1.14.133. VCCT_GXBR_USER_VOLTAGE 1.14.134. VCCT_GXB_USER_VOLTAGE 1.14.135. VCCT_L_USER_VOLTAGE 1.14.136. VCCT_R_USER_VOLTAGE 1.14.137. VCCT_USER_VOLTAGE 1.14.138. VCC_HPS_USER_VOLTAGE 1.14.139. VCC_USER_VOLTAGE
1.15. Programmer Assignments x
1.15.1. GENERATE_CONFIG_HEXOUT_FILE 1.15.2. GENERATE_CONFIG_ISC_FILE 1.15.3. GENERATE_CONFIG_JAM_FILE 1.15.4. GENERATE_CONFIG_JBC_FILE 1.15.5. GENERATE_CONFIG_JBC_FILE_COMPRESSED 1.15.6. GENERATE_CONFIG_SVF_FILE 1.15.7. GENERATE_JAM_FILE 1.15.8. GENERATE_JBC_FILE 1.15.9. GENERATE_JBC_FILE_COMPRESSED 1.15.10. GENERATE_SVF_FILE 1.15.11. HPS_EARLY_IO_RELEASE 1.15.12. MERGE_HEX_FILE
1.16. Project-Wide Assignments x
1.16.1. AGGREGATE_REVISION 1.16.2. AHDL_FILE 1.16.3. AHDL_TEXT_DESIGN_OUTPUT_FILE 1.16.4. ALLOW_DSP_RETIMING 1.16.5. ALLOW_RAM_RETIMING 1.16.6. ASM_FILE 1.16.7. AUTO_EXPORT_VER_COMPATIBLE_DB 1.16.8. BASE_REVISION_PROJECT_OUTPUT_DIRECTORY 1.16.9. BDF_FILE 1.16.10. BINARY_FILE 1.16.11. BSF_FILE 1.16.12. CDF_FILE 1.16.13. COMMAND_MACRO_FILE 1.16.14. CPP_FILE 1.16.15. CPP_INCLUDE_FILE 1.16.16. CUSP_FILE 1.16.17. CVP_REVISION 1.16.18. C_FILE 1.16.19. DEPENDENCY_FILE 1.16.20. DSPBUILDER_FILE 1.16.21. EDIF_FILE 1.16.22. ELF_FILE 1.16.23. ENABLE_COMPACT_REPORT_TABLE 1.16.24. ENABLE_REDUCED_MEMORY_MODE 1.16.25. EQUATION_FILE 1.16.26. FLOW_DISABLE_ASSEMBLER 1.16.27. FLOW_ENABLE_IO_ASSIGNMENT_ANALYSIS 1.16.28. FLOW_ENABLE_PARALLEL_MODULES 1.16.29. FLOW_ENABLE_POWER_ANALYZER 1.16.30. FLOW_ENABLE_RTL_VIEWER 1.16.31. GDF_FILE 1.16.32. HEX_FILE 1.16.33. HEX_OUTPUT_FILE 1.16.34. HPS_ISW_DATA 1.16.35. HPS_ISW_EMIF 1.16.36. HPS_ISW_FILE 1.16.37. HTML_FILE 1.16.38. HTML_REPORT_FILE 1.16.39. INCLUDE_FILE 1.16.40. INVALID_DESIGN_SOURCE 1.16.41. IPX_FILE 1.16.42. IP_COMPONENT_AUTHOR 1.16.43. IP_COMPONENT_DESCRIPTION 1.16.44. IP_COMPONENT_DISPLAY_NAME 1.16.45. IP_COMPONENT_DOCUMENTATION_LINK 1.16.46. IP_COMPONENT_GROUP 1.16.47. IP_COMPONENT_INTERNAL 1.16.48. IP_COMPONENT_NAME 1.16.49. IP_COMPONENT_PARAMETER 1.16.50. IP_COMPONENT_REPORT_HIERARCHY 1.16.51. IP_COMPONENT_VERSION 1.16.52. IP_FILE 1.16.53. IP_GENERATED_DEVICE_FAMILY 1.16.54. IP_QSYS_MODE 1.16.55. IP_TARGETED_DEVICE_FAMILY 1.16.56. IP_TARGETED_PART_TRAIT 1.16.57. IP_TOOL_ENV 1.16.58. IP_TOOL_HIERARCHY_LEVELS 1.16.59. IP_TOOL_NAME 1.16.60. IP_TOOL_VENDOR_NAME 1.16.61. IP_TOOL_VERSION 1.16.62. IP_TOOL_VERSION_CREATED 1.16.63. IP_TOP_LEVEL_COMPONENT_NAME 1.16.64. IP_TOP_LEVEL_ENTITY_NAME 1.16.65. JAM_FILE 1.16.66. JBC_FILE 1.16.67. LICENSE_FILE 1.16.68. LMF_FILE 1.16.69. LOGIC_ANALYZER_INTERFACE_FILE 1.16.70. MAP_FILE 1.16.71. MASK_REVISION 1.16.72. MAX_IGNORED_ASGN_MSG 1.16.73. MESSAGE_DISABLE 1.16.74. MESSAGE_ENABLE 1.16.75. MIF_FILE 1.16.76. MISC_FILE 1.16.77. NUM_PARALLEL_PROCESSORS 1.16.78. OBJECT_FILE 1.16.79. OCP_FILE 1.16.80. PARTIAL_SRAM_OBJECT_FILE 1.16.81. PIN_FILE 1.16.82. POWER_INPUT_FILE 1.16.83. PPF_FILE 1.16.84. PROGRAMMER_OBJECT_FILE 1.16.85. PROJECT_OUTPUT_DIRECTORY 1.16.86. PROJECT_USE_SIMPLIFIED_NAMES 1.16.87. QARLOG_FILE 1.16.88. QAR_FILE 1.16.89. QIP_FILE 1.16.90. QSYS_FILE 1.16.91. QUARTUS_PTF_FILE 1.16.92. QUARTUS_SBD_FILE 1.16.93. QUARTUS_STANDARD_DELAY_FILE 1.16.94. RAW_BINARY_FILE 1.16.95. READ_OR_WRITE_IN_BYTE_ADDRESS 1.16.96. RECONFIGURABLE_REVISION 1.16.97. REVISION_TYPE 1.16.98. RUN_FULL_COMPILE_ON_DEVICE_CHANGE 1.16.99. SBI_FILE 1.16.100. SDC_ENTITY_FILE 1.16.101. SDC_ENTITY_HELPER_FILE 1.16.102. SDC_FILE 1.16.103. SDF_OUTPUT_FILE 1.16.104. SERIAL_BITSTREAM_FILE 1.16.105. SIGNALTAP_FILE 1.16.106. SIP_FILE 1.16.107. SLD_FILE 1.16.108. SMF_FILE 1.16.109. SOFTWARE_LIBRARY_FILE 1.16.110. SOPCINFO_FILE 1.16.111. SOPC_FILE 1.16.112. SOURCE_TCL_SCRIPT_FILE 1.16.113. SPD_FILE 1.16.114. SRAM_OBJECT_FILE 1.16.115. SRECORDS_FILE 1.16.116. SVF_FILE 1.16.117. SYM_FILE 1.16.118. SYNTHESIS_ONLY_QIP 1.16.119. SYSTEMVERILOG_FILE 1.16.120. TCL_ENTITY_FILE 1.16.121. TCL_SCRIPT_FILE 1.16.122. TEMPLATE_FILE 1.16.123. TEXT_FILE 1.16.124. TEXT_FORMAT_REPORT_FILE 1.16.125. TIMING_ANALYSIS_OUTPUT_FILE 1.16.126. VCD_FILE 1.16.127. VECTOR_TABLE_OUTPUT_FILE 1.16.128. VECTOR_TEXT_FILE 1.16.129. VECTOR_WAVEFORM_FILE 1.16.130. VERILOG_FILE 1.16.131. VERILOG_INCLUDE_FILE 1.16.132. VERILOG_OUTPUT_FILE 1.16.133. VERILOG_TEST_BENCH_FILE 1.16.134. VER_COMPATIBLE_DB_DIR 1.16.135. VHDL_FILE 1.16.136. VHDL_OUTPUT_FILE 1.16.137. VHDL_TEST_BENCH_FILE 1.16.138. VQM_FILE 1.16.139. ZIP_VECTOR_WAVEFORM_FILE
1.17. Retimer Assignments x
1.17.1. HYPER_RETIMER_FAST_FORWARD_ADD_PIPELINING_MAX 1.17.2. HYPER_RETIMER_FAST_FORWARD_ASYNCH_CLEAR 1.17.3. HYPER_RETIMER_FAST_FORWARD_DSP_BLOCKS 1.17.4. HYPER_RETIMER_FAST_FORWARD_RAM_BLOCKS 1.17.5. HYPER_RETIMER_FAST_FORWARD_USER_PRESERVE_RESTRICTION
1.18. Retimer Fast Forward Assignments x
1.18.1. CRITICAL_CHAIN_VIEWER 1.18.2. FLOW_ENABLE_HYPER_RETIMER_FAST_FORWARD
1.19. Signal Tap Assignments x
1.19.1. CREATE_PARTITION_BOUNDARY_PORTS 1.19.2. ENABLE_LOGIC_ANALYZER_INTERFACE 1.19.3. ENABLE_SIGNALTAP 1.19.4. STP_FILE 1.19.5. USE_LOGIC_ANALYZER_INTERFACE_FILE 1.19.6. USE_SIGNALTAP_FILE
1.20. Simulator Assignments x
1.20.1. ACTION 1.20.2. ADD_DEFAULT_PINS_TO_SIMULATION_OUTPUT_WAVEFORMS 1.20.3. ADD_TO_SIMULATION_OUTPUT_WAVEFORMS 1.20.4. ALIAS 1.20.5. AUTO_USE_SIMULATION_PDB_NETLIST 1.20.6. BREAKPOINT_STATE 1.20.7. CHECK_OUTPUTS 1.20.8. END_TIME 1.20.9. EXTERNAL_PIN_CONNECTION 1.20.10. GLITCH_DETECTION 1.20.11. GLITCH_INTERVAL 1.20.12. IMMEDIATE_ASSERTION_FAIL_ACTION 1.20.13. IMMEDIATE_ASSERTION_FAIL_MESSAGE 1.20.14. IMMEDIATE_ASSERTION_PASS_MESSAGE 1.20.15. IMMEDIATE_ASSERTION_STATE 1.20.16. IMMEDIATE_ASSERTION_TEST_CONDITION 1.20.17. INCREMENTAL_VECTOR_INPUT_SOURCE 1.20.18. PASSIVE_RESISTOR 1.20.19. SETUP_HOLD_DETECTION Type Device Support Notes Syntax Default Value 1.20.20. SETUP_HOLD_DETECTION_INPUT_REGISTERS_BIDIR_PINS_DISABLED 1.20.21. SETUP_HOLD_TIME_VIOLATION_DETECTION 1.20.22. SIMULATION_BUS_CHANNEL_GROUPING 1.20.23. SIMULATION_COMPARE_SIGNAL 1.20.24. SIMULATION_COMPLETE_COVERAGE_REPORT_PANEL 1.20.25. SIMULATION_COVERAGE 1.20.26. SIMULATION_DEFAULT_VECTOR_COMPARE_TOLERANCE 1.20.27. SIMULATION_MISSING_0_VALUE_COVERAGE_REPORT_PANEL 1.20.28. SIMULATION_MISSING_1_VALUE_COVERAGE_REPORT_PANEL 1.20.29. SIMULATION_MODE 1.20.30. SIMULATION_NETLIST_VIEWER 1.20.31. SIMULATION_SIGNAL_COMPARE_TOLERANCE 1.20.32. SIMULATION_VDB_RESULT_FLUSH 1.20.33. SIMULATION_VECTOR_COMPARE_BEGIN_TIME 1.20.34. SIMULATION_VECTOR_COMPARE_END_TIME 1.20.35. SIMULATION_VECTOR_COMPARE_RULE_FOR_0 1.20.36. SIMULATION_VECTOR_COMPARE_RULE_FOR_1 1.20.37. SIMULATION_VECTOR_COMPARE_RULE_FOR_DC 1.20.38. SIMULATION_VECTOR_COMPARE_RULE_FOR_H 1.20.39. SIMULATION_VECTOR_COMPARE_RULE_FOR_L 1.20.40. SIMULATION_VECTOR_COMPARE_RULE_FOR_U 1.20.41. SIMULATION_VECTOR_COMPARE_RULE_FOR_W 1.20.42. SIMULATION_VECTOR_COMPARE_RULE_FOR_X 1.20.43. SIMULATION_VECTOR_COMPARE_RULE_FOR_Z 1.20.44. SIM_BEHAVIOR_SIMULATION 1.20.45. SIM_COMPILE_HDL_FILES 1.20.46. SIM_HDL_TOP_MODULE_NAME 1.20.47. SIM_OVERWRITE_WAVEFORM_INPUTS 1.20.48. SIM_TAP_REGISTER_D_Q_PORTS 1.20.49. SIM_VECTOR_COMPARED_CLOCK_DUTY_CYCLE 1.20.50. SIM_VECTOR_COMPARED_CLOCK_OFFSET 1.20.51. SIM_VECTOR_COMPARED_CLOCK_PERIOD 1.20.52. START_TIME 1.20.53. TRIGGER_EQUATION 1.20.54. TRIGGER_VECTOR_COMPARE_ON_SIGNAL 1.20.55. USER_MESSAGE 1.20.56. VECTOR_COMPARE_TRIGGER_MODE 1.20.57. VECTOR_INPUT_SOURCE 1.20.58. VECTOR_OUTPUT_DESTINATION 1.20.59. VECTOR_OUTPUT_FORMAT 1.20.60. X_ON_VIOLATION_OPTION
1. Quartus® Prime Pro Edition Settings File Reference Manual

1.20.19. SETUP_HOLD_DETECTION

Detects setup and hold time violations.

Type

Boolean

Device Support

  • This setting can be used in projects targeting any Intel FPGA device family.

Notes

None

Syntax

		set_global_assignment -name SETUP_HOLD_DETECTION <value>

Default Value

Off

Level Two Title