A newer version of this document is available. Customers should click here to go to the newest version.
In the F-Tile Interlaken Intel® FPGA IP core, you initiate the reset (reset_n=0) and hold until the IP core returns a reset acknowledge (reset_ack_n=0). After the reset is removed (reset_n=1), the reset acknowledge returns to its initial state (reset_ack_n=1). In the design example, a rst_ack_sticky register holds the reset acknowledge assertion and then triggers the removal of the reset (reset_n=1). You can use alternative methods that fit your design needs.
Important: In any scenario where the internal serial loopback is required, you must release TX and RX of the F-tile separately in a specific order. Refer to the system console script for more information.
Figure 7. Reset Sequence in NRZ Mode
Figure 8. Reset Sequence in PAM4 Mode
Did you find the information on this page useful?