Setup
You can run the measurement analysis sample with command-line options to see various uses of the measurement library. This guide provides examples of commands and outputs. Before attempting to run the sample, make sure you have completed the following prerequisites.
Prerequisites
This guide is based on a host-target setup. Confirm that you have a host system and a target system that are configured according to the Get Started Guide.
Confirm Real-Time Kernel
Confirm that the target system is running the real-time kernel.
- From your host system, connect to the target system:ssh <user>@<target>
- In the SSH session, run the following command to runtcc_rt_checker:tcc_rt_checker
- In the output, find theRT Kernel Checkerrow and confirm that it containsRT_READY.+-----+-------------------+--------------------------+----------------------+----------+ | 4 | RT Kernel Checker | Checks that RT kernel is | Current kernel is RT | RT_READY | | | | used | | | +-----+-------------------+--------------------------+----------------------+----------+
- If theRT Kernel Checkerrow does not reportRT_READY, reboot the target system and make sure to select the RT kernel.
Run the Sample
After completing the setup, try these examples: