Developer Guide

  • 2021.1
  • 11/03/2021
  • Public
Contents

Setup

You can run the measurement monitoring sample with command-line options to see various uses of the measurement library. This guide provides example commands and outputs. Before attempting to run the sample, make sure you have completed the following prerequisites.

Prerequisites

This guide is based on a host-target setup. Confirm that you have a host system and a target system that are configured according to the Get Started Guide.

Confirm Real-Time Kernel

Confirm that the target system is running the real-time kernel.
  1. From your host system, connect to the target system:
    ssh <user>@<target>
  2. In the SSH session, run the following command to get the name of the current kernel:
    uname -r
  3. Confirm that the output contains
    intel-preempt-rt
    . Example output:
    5.4.52-rt31-intel-preempt-rt
  4. If the output does not contain
    intel-preempt-rt
    , reboot the target system and make sure to select the RT kernel.

Run the Sample

After completing the setup, try these examples:

Product and Performance Information

1

Performance varies by use, configuration and other factors. Learn more at www.Intel.com/PerformanceIndex.