INTEL DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH WILL BE UNINTERRUPTED OR ERROR-FREE. //**************************************************************** quartus-21.1-0.06-readme.txt Readme file for Intel(R) Quartus(R) Prime 21.1 Patch 0.06 Copyright (C) Intel Corporation 2019 All right reserved. Patch created on April 22, 2021, 10:59 p.m. Patch Case#: 1508942598 Patches included: Patches conflicted: //**************************************************************** Description: INTEL DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH WILL BE UNINTERRUPTED OR ERROR-FREE. //**************************************************************** quartus-21.1-0.06-readme.txt Readme file for Intel(R) Quartus(R) Prime 21.1 Patch 0.06 Copyright (C) Intel Corporation 2019 All right reserved. Patch created on April 22, 2021, 10:59 p.m. Patch Case#: 1508942598 Patches included: Patches conflicted: //**************************************************************** Description: This patch fixes multiple issues below: 1. Case ID: 1508945787, 22012654574 Device Family: Intel® Agilex™ F-Series, Intel® Stratix® 10 Series Why does CONF_DONE pin fail to go high after reprogramming RBF with a matching key? Description In the Intel® Quartus® Prime Pro Edition software version 21.1, if you program the RBF with a matching key, the process will pass. Then if you program the RBF with a mismatched key, the process will fail. Then if you program the RBF with a matching key, you expect the process to pass, but the process fails. Error (18944): CONF_DONE pin failed to go high in device 0. Make sure all communication cables are securely connected, select a different device, check the power on the target system, or make sure all nCE pins are connected to GND. 2. Case ID: 1508942598, 22012565848, 22012765813, 22012742291 Device Family: Intel® Stratix® 10 Series Why does Factory Image fail to boot after all application images are corrupted? Description Prior to Intel® Quartus® Prime Pro Edition version 21.1, if all application images fail to load and execute, then the system will ultimately load and execute the factory DCMF image. However, due to an error in the Intel® Quartus® Prime Pro Edition version 21.1, the system will fail to boot the factory image. Note: You can reuse the existing SOF file to generate the .jic or .rpd file after the patch is installed. 3. Device Family: Intel® Agilex™ F-Series, Intel® Stratix® 10 Series Case ID: 22012742782 Why am I not able to burn Physical eFuses? Description In the Intel® Quartus® Prime Pro Edition software version 21.1, physical fusing of user defined fuses is not allowed. Only virtual fusing support is present. 4. Device Family: Intel® Agilex™ F-Series Case ID: 1508992408 Description: Remove the invalid AS_CLK 133MHz and 108MHz setting from Quartus. //**************************************************************** Caution - You must either have previously installed the Intel(R) Quartus(R) Prime 21.1 software or must install the Intel(R) Quartus(R) Prime 21.1 software before installing this patch. Otherwise, the patch will not be installed correctly and the Intel(R) Quartus(R) Prime software will not run properly. Note: - means this patch includes those patches. If you already installed those patches, you can safely install this new patch on top. - means this patch conflicts with those patches. If you have any of those patches installed, don't install this patch. Contact Intel for further support. Caution - You must either have previously installed the Intel(R) Quartus(R) Prime 21.1 software or must install the Intel(R) Quartus(R) Prime 21.1 software before installing this patch. Otherwise, the patch will not be installed correctly and the Intel(R) Quartus(R) Prime software will not run properly. Note: - means this patch includes those patches. If you already installed those patches, you can safely install this new patch on top. - means this patch conflicts with those patches. If you have any of those patches installed, don't install this patch. Contact Intel for further support.