INTEL DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH WILL BE UNINTERRUPTED OR ERROR-FREE. //**************************************************************** quartus-20.2-0.19-readme.txt Readme file for Quartus Prime 20.2 Patch 0.19 Copyright (C) Intel Corporation 2020 All right reserved. Patch created on July 27 2020 Patch Case#: 14012082036 //**************************************************************** Description: Problem: During Stratix 10 post-route physical synthesis (enabled via a High Performance or Superior Performance Optimization Mode), one or more timing paths is missing from the default sign-off Timing Analyzer reports. Solution: This patch resolves this issue. Caution - You must either have previously installed the Quartus Prime 20.2 software or must install the Quartus Prime 20.2 software before installing this patch. Otherwise, the patch will not be installed correctly and the Quartus Prime software will not run properly.