ALTERA DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH
WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH
WILL BE UNINTERRUPTED OR ERROR-FREE.

//****************************************************************
quartus-16.1.2-2.29-readme.txt
Readme file for Quartus Prime 16.1.2 Patch 2.29
Copyright (C) Altera Corporation 2017 All right reserved.
Patch created on October 11 2017
Patch Case#: 497253
//****************************************************************

Description:
This patch is to change rx_pcs ctrl_plane_bonding_consumption to
follow rx_bonding setting instead of tx.

Caution - You must either have previously installed the
          Quartus Prime 16.1.2 software or must
          install the Quartus Prime 16.1.2 software
          before installing this patch. Otherwise, the patch will
          not be installed correctly and the Quartus Prime
          software will not run properly.

Patch 2.29 installation steps:

1. Run quartus-16.1.2-2.29-* file and complete installation steps.
2. Start Quartus II 16.1.2 and open project
3. Open, regenerate Native PHY IP and recompile design.