ALTERA DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH 
WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH 
WILL BE UNINTERRUPTED OR ERROR-FREE. 

//**************************************************************** 
quartus-12.0-0.dp2b-readme.txt 
Readme file for Quartus II 12.0 Patch 0.dp2b
Copyright (C) Altera Corporation 2012 All right reserved. 
Patch created on July 27 2012
Patch SPR#: 65624 
SPRs fixed: 
//**************************************************************** 

This patch updates OCT calibration block settings in Quartus II
software to match changes in Rref resistance from 2 KOhm to 1.8 KOhm.

Instructions: User must regenerate Quartus II Software IP files and
              recompile his/her design for this patch to take effect:
              
	      1. On a Qsys-based design, by opening the design in Qsys,
              	 (re)generating the files and recompiling.  
	      2. On a Megawizard-based design, by opening the existing
              	 Megawizard design, (re)generating the files and
              	 recompiling.


Caution - You must either have previously installed the 
          Quartus II 12.0 software or must 
          install the Quartus II 12.0 software 
          before installing this patch. Otherwise, the patch will 
          not be installed correctly and the Quartus II 
          software will not run properly.