ALTERA DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH WILL BE UNINTERRUPTED OR ERROR-FREE. //**************************************************************** readme_patch_9.1_1.38.txt Readme file for Quartus II 9.1 Patch 1.38 Copyright (C) Altera Corporation 2010 All right reserved. Patch created on March 01 2010 Patch SPR#: 334693 SPRs fixed: 334152, 328038, 330912 //**************************************************************** Problem: Configuration failure occurs when a customer program the EPCS64 with compressed .pof/.rpd/.jic file generated in QII v9.1 SP1. Solution: Added additional postamble byte to bitstream for the following conditions: -Configuration mode is ACTIVE_SERIAL -Compression is enabled Device family is Stratix II, Stratix II GX, Arria GX, Cylcone & Cyclone II Caution - You must either have previously installed the Quartus II software version 9.1 SP1 or must install the Quartus II software version 9.1 SP1 before installing this patch. Otherwise, the patch will not be installed correctly and the Quartus II software will not run properly.