INTEL DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH WILL BE UNINTERRUPTED OR ERROR-FREE. //**************************************************************** quartus-21.4-0.37fw-readme.txt Readme file for Intel(R) Quartus(R) Prime 21.4 Patch 0.37fw Copyright (C) Intel Corporation 2019 All right reserved. Patch created on March 17, 2022, 11:32 p.m. Patch Case#: 15010730487 Patches included: Patches conflicted: //**************************************************************** Description: This patch include the below items : a) CLEAR_FAULT after getting STATUS_BYTE !=0 b) EMQ reporting the correct SEU error caused by VID c) Overwrite VR UV/OV limit for ED8401 during bitstream generation if INI setting is present: : bitasm_enable_over_voltage_limit_overwrite=4W4BETXI@on d) This patch addresses a problem which can cause boot failures for Intel(R) Agilex (TM) SoC Hard Processor System Remote System Update (RSU) Combined Application Images after a Linux reboot command is issued from Linux-socfpga running on the Intel(R) Agilex(TM) HPS. Please in include the INI in the quartus.ini to overwrite the VR UV/OV limit for ED8401 For item d: - RSU Application / Combined Application Images must be re-created using the Quartus Programming file generator tool (quartus_pfg) - A re-compile of the Intel Quartus Prime Pro design is not required Caution - You must either have previously installed the Intel(R) Quartus(R) Prime 21.4 software or must install the Intel(R) Quartus(R) Prime 21.4 software before installing this patch. Otherwise, the patch will not be installed correctly and the Intel(R) Quartus(R) Prime software will not run properly. Note: - means this patch includes those patches. If you already installed those patches, you can safely install this new patch on top. - means this patch conflicts with those patches. If you have any of those patches installed, don't install this patch. Contact Intel for further support.