ALTERA DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH WILL BE UNINTERRUPTED OR ERROR-FREE. //**************************************************************** readme_patch_9.1_0.10.txt Readme file for Quartus II 9.1 Patch 0.10 (Linux version) Copyright (C) Altera Corporation 2009 All right reserved. Patch created on 11/06/2009 Patch SPR#: 327024 SPRs fixed: 325527 //**************************************************************** The patch makes the following fixes to the Quartus II softwarwe: 1. Illegal mode checking for channel/PLL reconfiguration should not affect TX data rate switch mode. 2. Correct the address for TX data rate switch when TX data rate switch is used together with channel/PLL reconfig mode. 3. Reset the MIF_stage register in the altgx_reconfig after channel/PLL reconfig is done so that TX data rate switch performed after that can work properly. Caution - You must either have previously installed the Quartus II software version 9.1 or must install the Quartus II software version 9.1 before installing this patch. Otherwise, the patch will not be installed correctly and the Quartus II software will not run properly.