Article ID: 000076672 Content Type: Troubleshooting Last Reviewed: 02/03/2020

Why does the Low Latency Ethernet 10G MAC Intel® FPGA IP generated design example simulation fail?

Environment

  • Intel® Quartus® Prime Pro Edition
    • BUILT IN - ARTICLE INTRO SECOND COMPONENT

    Critical Issue

    Description

    Due to a problem with the Intel® Quartus® Prime Pro software version 19.3, the Low Latency 10G MAC Intel® FPGA IP generated design example may encounter the above problem. This is because the simulation model outputs an "X" (undefined) instead of valid data,  this causes the block lock signal to de-assert and the simulation then stops. 

    Resolution

    This problem has been fixed starting in the Intel® Quartus® Prime Pro Edition software version 19.4.

    Related Products

    This article applies to 3 products

    Intel® Cyclone® 10 GX FPGA
    Intel® Arria® 10 FPGAs and SoC FPGAs
    Intel® Stratix® 10 FPGAs and SoC FPGAs

    Need more help?

    Contact support

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.