|
|
|
 |
 |
|
| Intel® PRO/Wireless 2011B LAN Access Point |
|
 |
|
| Standards and Manageability |
| Standards Conformance |
Wi-Fi* IEEE 802.11b High Rate, 802.3u/100BASE-T, SNMP v2, 802.1H, 802.1d Spanning Tree, 802.11d (International Roaming) |
| Local Configuration |
Direct console port (serial EIA-232 DB-9 male) |
| Remote Configuration |
HTTP (via Web browser), Telnet, SNMP, FTP, and Intel feature to do bulk configuration to many Access Points |
| Automatic Configuration |
BOOTP, DHCP and Automatic Channel Selection |
| Management Features |
- Client Access Control via MAC address
- Embedded HTTP Server
- SNMP traps
- Multilevel passwords
|
| Diagnostic Capabilities |
- Event logging, data packet tracing, SNMP alarm generation, operating statistics
- Protocol and bandwidth filters
- Site Survey utility with signal strength logging
|
| Roaming Support |
IEEE 802.11b High Rate compliant with Intel-enhanced roaming features | |
| Performance |
| Range at 1 Mbps (typical) |
- 1500ft (460m) open environment
- 300ft (90m) office environment
|
| Range at 11 Mbps (typical) |
- 400ft (120m) open environment
- 100ft (30m) office environment
|
| Maximum Clients |
256 |
| Antenna |
Two 1dBi dipole antennas with diversity support, also supports specialty antennas |
| Receive sensitivity |
- -90dBm @ 1 Mbps
- -88dBm @ 2 Mbps
- -87dBm @ 5.5 Mbps
- -83dBm @ 11 Mbps
|
| Performance Enhancements |
- Proxy ARP
- Short preamble support
- QoS Voice and Data Prioritization
- 802.1H encapsulation
|
| Security |
- 64-bit or 128-bit encryption
- Access control list
- MD5 member authentication (Mobile IP)
| |
| Power and Dimensions |
| Max Output Power |
|
| Power Supply |
- Input: 85 to 270V AC
- Output: 24V DC
- 24V DC over CAT5 cabling
|
| Power Enhancement |
Power over Ethernet option (eliminates need for AC power at Access Point location) |
| Dimensions |
- Length: 24.69cm/9.72in
- Width: 18.34mm/7.22in
- Height: 4.85cm/1.91in
- Weight (w/power supply): 1 lb/0.454kg
| |
| Safety and Hardware |
| Safety Compliance |
- USA/Canada: UL1950/CSA 22.2
- Europe: CE marked
|
| Hardware Shipping Configuration |
Access point, two dipole antennas, one power supply, one country-specific power supply cord (three in European SKUs), mounting brackets, clips and screws | |
This applies to:
|
|
|
|
End of Interactive Support DisclaimerThese products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.
THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "Terms of use". For information on currently available Intel products, please see www.intel.com/products.
|
|
Solution ID: CS-008104
Date Created: 06-Jan-2004
Last Modified: 19-Jan-2009
|
|
