Software Products
Intel® vPro™ Technology
Passing the Brand Verification Tool with Intel® Desktop Boards

  1. Set BIOS jumper from 1-2 to 2-3 to enter BIOS Configure Mode.
    Refer to the product documentation of the board for information on BIOS Setup Configuration Jumper Settings.
  2. Under Maintenance menu perform a BIOS password reset through 'Clear BIOS Password option'.
  3. Load Intel® Active Management Technology (Intel® AMT) default setting through 'Reset Intel AMT to default' option.
  4. Press 'F10' to save and exit.
  5. Turn off system and put back the jumper to 1-2.
  6. Boot up the system. Press F2 to enter BIOS.
  7. Under Security menu, set the following to enabled:
    • XD Technology
    • VT Technology
    • VT-D
    • Intel® Trusted Execution Technology
    • VA operation
  8. Press 'F10' to save and exit.
  9. Boot up the system. Press F2 to enter BIOS.
  10. Under Intel ME menu, change the default password 'admin' to 'P@ssw0rd'.
  11. Through 'Intel Active Management Technology Configuration', set 'Provisioning Configuration' to 'Small-Medium Business'.
  12. Press 'F10' to save and exit.
  13. Boot to OS and run the BVT 2.0.622.

This applies to:

Intel® vPro™ Technology

Solution ID: CS-028756
Last Modified: 05-Feb-2014
Date Created: 22-Jan-2008
Back to Top